24
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After First 5 Hours
• Check hydraulic fluid level
• Change hydraulic filter
Each Use
• Check engine oil level
• Check safety system
• Clean engine air intake
1
• Clean mower housing
Every 8 Hours
• Check cutting blades
• Grease blade spindle bearings
Every 25 Hours
• Check hydraulic fluid level
• Grease mower support and push arms
• Grease brake lever
• Oil linkage bushings
1
• Check battery electrolyte
• Check tire pressure
• Grease both idler pulley pivots
Every 40 Hours • Grease front tires
Every 50 Hours • Check belts for wear/cracks
Every 100 Hours
• Change engine oil
1
• Check spark plug(s)
• Check hydraulic lines
Every 200 Hours
• Change oil filter
1
• Change hydraulic filter
• Replace fuel filter
Every 250 Hours • Service main air cleaner element
1
Every 500 Hours or at
Storage
• Adjust and grease caster pivots
• Adjust wheel hub slotted nut
• Replace inner air cleaner element
1
Before Storage
• Perform all maintenance procedures listed above before storage
• Drain gasoline
• Charge battery, disconnect cables
• Paint chipped surfaces
1
More often in dusty, dirty conditions
Important Refer to your engine operator’s manual for additional maintenance procedures.
To Next Page
Loading...
