Toro 74252 - Schematics and Warranty; Schematics

64 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Schematics

Wiring Diagram (Rev. I)

61

Table of Contents

Table of Contents2
Introduction2
Safety4
Safe Operating Practices4
- Slope Operation5
- Maintenance and Storage5
Slope Chart7
Safety and Instructional Decals8
Product Overview14
Controls14
Operation15
- Adding Fuel15
- Checking the Engine Oil Level16
- Using the Rollover Protection16
  - System (ROPS)16
- Think Safety First17
- Operating the Parking Brake18
- Starting and Stopping the Engine19
- Operating in Cool Weather20
- Operating the Power Take off20
- (Pto)20
- The Safety Interlock System21
- Driving Forward or Backward21
- Stopping the Machine22
- Adjusting the Height-Of-Cut22
- Using the Lift Assist Lever22
- Adjusting the Anti-Scalp23
  - Rollers23
- Adjusting the Flow Bafﬂe24
- Positioning the Flow Bafﬂe24
- Positioning the Seat25
- Unlatching the Seat26
- Pushing the Machine by Hand26
- Using the Side Discharge27
- Breaking in a New Machine27
- Transporting Machines27
- Loading Machines27
- Using the Z Stand28
- Operating Tips29
  - Cutting Speed30
  - Blade Maintenance30
Maintenance31
Recommended Maintenance31
- Schedule(S)31
Lubrication32
- Greasing and Lubrication32
- Greasing the Spindles32
Engine Maintenance33
- Servicing the Air Cleaner33
- Servicing the Engine Oil34
- Servicing the Spark Plug35
- Servicing the Spark Arrester36
Fuel System Maintenance36
- Replacing the Fuel Filter36
- Servicing the Fuel Tank37
Electrical System Maintenance37
- Servicing the Battery37
  - Installing the Battery38
  - Charging the Battery38
- Servicing the Fuses39
Adjusting the Tracking40
Checking the Tire Pressure40
Checking the Wheel Hub Slotted40
Nut40
- Adjusting the Caster Pivot41
  - Bearing41
- Cooling System Maintenance41
  - Servicing the Cooling System41
    - Hydraulic Pumps42
    - Brake Maintenance43
  - Adjusting the Parking Brake43
- Belt Maintenance43
- Controls System Maintenance46
  - Adjusting the Control Handle46
  - Neutral Position46
- Hydraulic System Maintenance47
- Checking the Hydraulic Fluid47
- Replacing the Hydraulic Filter and Oil48
- Bleeding the Hydraulic System49
- Checking the Hydraulic Hoses49
- Setting the Hydraulic Pump49
- Neutral Position49
Drive System Maintenance40
Leveling the Mower at Three51
- Positions51
- Servicing the Cutting Blades53
- Removing the Blades54
- Replacing the Grass Deﬂector55
- Cleaning56
  - Cleaning under the Mower56
Mower Deck Maintenance51
Storage57
Troubleshooting58
Schematics61
The Toro Total Coverage Guarantee64

Related product manuals

Preview: Toro 74251

Preview: Toro 74253CP

Preview: Toro 74274

Preview: Toro 74248