Toro 74253CP - Page 49

Figure69
1.Cap3.Colduidlevel-full
2.Bafe4.Hotuidlevel-full
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Ifhydraulicuidisinjectedintotheskin
itmustbesurgicallyremovedwithinafew
hoursbyadoctorfamiliarwiththistypeof
injury.Gangrenemayresultifthisisnot
done.
•Keepbodyandhandsawayfrompinhole
leaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Makesureallhydraulicuidhosesand
linesareingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretohydraulicsystem.
ReplacingtheHydraulicFilterandOil
ServiceInterval:Aftertherst25hours
Yearly
Usesummerlterabove32°F(0°C)
Usewinterlterbelow32°F(0°C)
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
Important:Donotsubstituteautomotiveoil
lterorseverehydraulicsystemdamagemay
result.
3.Placedrainpanunderlter,removetheoldlter
andwipethelteradaptergasketsurfaceclean
(Figure70).
Figure70
1.Hydrauliclter
4.Removetherighthandhydrauliclinethatcomesinto
theadapter(Figure71).
5.Allowtheoiltodrainoutofthesystemintothe
drainpan.
6.Installtherighthandhydrauliclinetotheadapter
(Figure71).
Figure71
1.Righthandhydraulicline3.Hydraulictank
2.Hydrauliclter
7.Applyathincoattotherubbergasketonthe
replacementlter(Figure72).
8.Installthereplacementhydrauliclterontothelter
adapter.Donottighten.
9.Fillthehydraulictankwithhydraulicuiduntilthe
uidoverowsthelterandthenturntheoillter
clockwiseuntiltherubbergasketcontactsthelter
adapter,thentightenthelteranadditional1/2turn
(Figure72).
10.Cleanupanyspilleduid.
11.Adduidtothecoldlevelofthebafeinthe
hydraulictank.
49