Using the Lift Assist Lever
T he lift assist lev er is used along with the
height-of-cut lev er for raising the mo w er . T his
allo ws for easier raising of the mo w er .
1. Place y our foot onto lift assist lev er .
2. Press on the lift assist lev er while pulling up on
the height-of-cut lev er ( Figure 24 ).
Figure 24
1. Lift Assist Lever
Positioning the Seat
Changing the Seat Position
T he seat can mo v e forw ard and bac kw ard.
P osition the seat where y ou ha v e the best control
of the mac hine and are most comfor table .
1. T o adjust, mo v e the lev er sidew a ys to unloc k
seat ( Figure 25 ).
Figure 25
1. Seat suspension knob 2. Seat position adjustment
lever
2. Slide the seat to the desired position and
release lev er to loc k in position.
Changing the Seat Suspension
T he seat can be adjusted to pro vide a smooth and
comfor table ride . P osition the seat where y ou are
most comfor table .
T o adjust it, tur n the knob in front either direction
to pro vide the best comfor t ( Figure 25 ).
Changing the Back Position
T he bac k of the seat can be adjusted to pro vide
a comfor table ride . P osition the bac k of the seat
where it is most comfor table .
T o adjust it, tur n the knob , under the right-side
ar m rest, in either direction to pro vide the best
comfor t ( Figure 26 ).
25
To Next Page
Loading...
