Toro 74390 - Premaintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

Premaintenance
Procedures
RaisingtheSeat
Makesurethemotioncontrolleversarelockedinthepark
position.Lifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraisingtheseat:
•Serialplate
•Servicedecal
•Seatadjustmentbolts
•Fuellter
•Batteryandbatterycables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greasealllubrication
points.
GreaseType:No.2GeneralPurposeLithiumBaseGrease
1.Parkthemachineonalevelsurfaceanddisengagethe
bladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothepark
position,stoptheengine,removethekey,andwaitfor
allmovingpartstostopbeforeleavingtheoperating
position.
3.Cleanthegreasettings(Figure28)witharag.Make
suretoscrapeanypaintoffofthefrontofthetting(s).
1
G014522
Figure28
1.Frontcastertire
4.Connectagreaseguntoeachtting(Figure28).Pump
greaseintothettingsuntilgreasebeginstooozeout
ofthebearings.
5.Wipeupanyexcessgrease.
26