Need help?Do you have a question about the Toro TimeCutter Z5020 74372 and is the answer not in the manual?
General| Product Type | Zero Turn Mower |
|---|---|
| Series | TimeCutter |
| Model | Z5020 |
| SKU | 74372 |
| Cutting Width | 50 inches |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Deck Type | Fabricated |
| Turning Radius | Zero |
| Fuel Capacity | 3 gallons |
| Cutting Height | 1.5 - 4.5 inches |
| Speed | 7 mph forward, 3 mph reverse |
| Warranty | 3 years |
Warning regarding cancer, birth defects, and reproductive harm from engine exhaust.
Notification that the engine is not equipped with a spark arrester muffler as per California code.
Overview of manual's intent, contact information, and definition of key terms like Important and Note.
Explanation of the safety alert symbol and its associated hazard levels (Caution, Warning, Danger).
ANSI B71.1-2003 safety instructions for operating the mower, emphasizing hand/foot safety and clearing the area.
Precautions for operating the mower on slopes, including angle limits, speed, and terrain awareness.
Guidelines to prevent accidents involving children near the operating mower.
Statement that the machine does not provide for towing any equipment.
Precautions for handling gasoline to prevent fire, explosion, and personal injury.
Guidelines for maintaining the mower's condition and safety features.
Specific safety instructions for Toro riding mowers, including exhaust, battery, and attachment safety.
A chart with instructions on how to visually determine slope angles for safe operation.
Identification and explanation of various safety and instructional decals found on the mower.
Description of the ignition switch, throttle, choke, and blade control switch on the control panel.
Explanation of how to operate the levers for forward/backward movement and the parking brake.
Details on adjusting the mower deck height and using the foot assist pedal.
Explanation of symbols related to battery hazards like explosion, caustic liquid, and lead content.
Interpretation of various safety symbols, including warnings, hazards, and operational guidance.
Identification of major components of the riding mower through figures and labels.
Detailed explanation of the ignition switch, throttle, choke, and blade control switch functions.
Further details on operating the motion control levers for driving and engaging the parking brake.
In-depth explanation of adjusting the deck height and using the foot assist pedal.
Emphasizes reading safety instructions, avoiding wet grass/slopes, and preventing rollovers.
Details on using unleaded regular gasoline and avoiding methanol or high-ethanol blends.
Precautions for fueling, including static electricity, vapor hazards, and effects of gasoline on health.
Information on approved gasoline/alcohol and gasoline/ether blends for the machine.
Step-by-step instructions on how to safely add gasoline to the fuel tank.
Instructions on how to start the engine, including choke usage and ignition sequence.
Procedure for checking the engine oil level before operation.
Instructions on how to activate and deactivate the mower blades using the blade control switch.
Steps for safely shutting down the engine and preparing the machine for transport or storage.
Explanation of the safety interlock system's purpose and how to test its operation.
Instructions for moving the mower forward using the motion control levers.
Instructions for driving backward and safely stopping the machine.
Steps for adjusting the mower deck to the desired cutting height.
How to adjust the height and tilt of the motion control levers for operator comfort.
Instructions for adjusting the operator seat forward or backward for optimal control.
Instructions for manually moving the mower, emphasizing safety and avoiding towing.
Steps for preparing the machine to be pushed and for general operation.
Information about the mower's side discharge deflector and its function.
Advice on using fast throttle, cutting for the first time, and cutting 1/3 of grass blade.
Guidance on alternating mowing direction and mowing frequency based on grass growth.
Recommendations on cutting speed, avoiding cutting too low, and handling long grass.
Importance of cleaning the underside of the mower after each use for optimal performance.
Instructions for maintaining sharp blades for clean cutting and preventing tearing.
A table outlining maintenance tasks and their recommended service intervals (daily, 25, 50, 100, 200, 500 hours).
Procedure for raising the seat to access internal components like the fuel filter and battery.
Instructions for greasing front caster tire bearings at 25-hour intervals.
Guidance on checking, cleaning, and replacing the paper air cleaner element.
Detailed steps for servicing and replacing the air cleaner paper element.
Procedure for checking the engine oil level using the dipstick.
Step-by-step instructions for changing the engine oil and oil filter.
Instructions for removing, checking, and replacing the spark plug.
Procedure for installing the spark plug with correct torque and air gap.
Guidance on cleaning the engine's blower housing and cooling fins to prevent overheating.
Steps for replacing the fuel filter in the fuel line.
Instructions for safely removing the battery and charging it.
Steps for reinstalling the battery and connecting cables correctly.
Information on the location of fuses and how to replace a blown fuse.
Guidance on maintaining correct tire pressure for even cutting.
Instructions on maintaining sharp blades for optimal cutting performance and grass health.
Procedure to check if mower blades are bent, which can cause injury or death.
Steps for safely removing and installing mower blades, including torque specifications.
Procedure for checking and adjusting the mower deck for level side-to-side cutting.
Instructions for adjusting the mower deck's front-to-rear blade slope for proper cutting.
Step-by-step guide for detaching the mower deck from the tractor.
Procedures for inspecting belts for wear and replacing the mower belt.
Instructions for reattaching the mower deck to the tractor after maintenance.
Steps for removing and installing the grass deflector, ensuring proper spring loading.
Procedure for washing the mower deck underside using the washout fitting.
Comprehensive steps for cleaning, preparing, and storing the mower for extended periods.
Diagnosing and correcting issues like engine overheating, failure to crank, or hard starting.
Troubleshooting engine power reduction and the machine not driving.
Diagnosing and resolving problems related to abnormal vibration, uneven cutting, and blade rotation.
A schematic illustrating the mower's electrical system wiring.
Details on the warranty coverage for the evaporative emission control system.
Owner's duties for maintaining the product to ensure warranty coverage.
Requirements for warranty claims related to defects in materials or workmanship.
Details on the three-year limited warranty for residential use of Toro products.
Details on the limited warranty for commercial use of Toro products.
Instructions for obtaining warranty service and outlining owner responsibilities.
To Next Page