Toro 74444 - Adjusting the Flow Baffle

Figure21
1.Anti-scalproller3.FlangeNut
2.Bushing4.Bolt
AdjustingtheFlowBafe
Themowerdischargeowcanbeadjustedfordifferent
typesofmowingconditions.Positionthenutandbafe
togivethebestqualityofcut.
1.DisengagethePTO,movethemotioncontrol
leverstotheneutrallockedpositionandsetthe
parkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Toadjustthebafe,loosenthenut(Figure22).
4.Adjustthebafeandnutintheslottothedesired
dischargeowandtightenthenut.
g0121 19
1 2
Figure22
1.Slot
2.Nut
PositioningtheFlowBafe
Thefollowingguresareonlyrecommendationsfor
use.Adjustmentswillvarybygrasstype,moisture
content,andheightofgrass.
Note:Iftheenginepowerdrawsdownandthemower
groundspeedisthesame,openupthebafe.
PositionA
Thisisthefullrearposition.Thesuggesteduseforthis
positionisafollows.
•Useforshort,lightgrassmowingconditions.
•Useindryconditions.
•Forsmallergrassclippings.
•Propelsgrassclippingsfartherawayfromthe
mower.
G012120
Figure23
PositionB
Usethispositionwhenbagging.
G012121
Figure24
21