Toro 74917 - Adjusting the Anti-Scalp Rollers

4.Selectaholeintheheight-of-cutbracket
correspondingtotheheight-of-cutdesiredand,
insertthepin(Figure26).
5.Pushonthedecklift,pullbackonthetransport
lock,andslowlylowerthemowerdeck.
Figure26
1.Deckliftpedal
3.Transportlock
2.Cutofheightpin
AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,itis
recommendedtoadjusttheheightoftheanti-scalp
rollers.
1.Disengagethebladecontrolswitch(PTO),move
themotioncontrolleverstotheneutrallocked
positionandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
Figure27
1.Anti-scalproller4.FlangeNut
2.Spacer
5.Bolt
3.Bushing
Figure28
1.Anti-scalproller3.FlangeNut
2.Bushing4.Bolt
Figure29
1.Anti-scalproller4.FlangeNut
2.Spacer
5.Bolt
3.Bushing
23