g008955
Figure25
Transport-LockPositions
1.Transportlock3.UNLOCKposition—does
notlockthemowerdeck
intotransportposition
2.LOCKposition—mower
decklocksintotransport
position
AdjustingtheHeight-of-CutPin
Theheight-of-cutisadjustedfrom25to140mm(1
to5-1/2inches)in6mm(1/4inch)incrementsby
relocatingtheclevispinintodifferentholelocations.
1.Movethetransportlocktothelockposition.
2.Pushonthedeck-liftpedalwithyourfoot,and
raisethemowerdecktothetransportposition
(alsothe140mm(5-1/2inches)cuttingheight
position)asshowninFigure26.
3.Toadjust,rotatethepin90degreesandremove
thepinfromtheheight-of-cutbracket(Figure
26).
4.Selectaholeintheheight-of-cutbracket
correspondingtotheheight-of-cutdesired,and
insertthepin(Figure26).
5.Pushonthedecklift,pullbackonthetransport
lock,andslowlylowerthemowerdeck.
29
To Next Page
Loading...
