Toro 75759 User Manual

56 pages

To Next Page

FormNo.3433-639RevB

TimeCutter

5000orMX5000

RidingMower

ModelNo.75750—SerialNo.400000000andUp

ModelNo.75759—SerialNo.400000000andUp

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3433-639*

Other manuals for Toro 75759

Manual180 pages

Addendum2 pages

Questions and Answers:

T
thomas55Sep 7, 2025
What to do if my Toro Lawn Mower starter does not crank?
- A
  abrownSep 8, 2025
  If the starter on your Toro Lawn Mower doesn't crank, check these items: * Ensure the blade-control switch is disengaged. * Make sure the motion-control levers are in the PARK position. * Check the battery and charge it if it's dead. * Inspect the electrical connections for corrosion or looseness and ensure good contact. * See if a fuse is blown and replace it if necessary. If a relay or switch is damaged, contact an Authorized Service Dealer.
C
Chloe CarrSep 9, 2025
Why is my Toro Lawn Mower vibrating abnormally?
- J
  Jacob MunozSep 9, 2025
  Abnormal vibration in your Toro Lawn Mower can stem from several issues. Start by checking the cutting blades for bending or imbalance; if found, install new cutting blades. Then, ensure the blade mounting bolt and engine mounting bolts are tightened securely. Also, inspect the engine pulley, idler pulley, or blade pulley for looseness and tighten the appropriate pulley. For a damaged engine pulley, bent blade spindle, or loose/worn motor mount, contact an Authorized Service Dealer.

Toro 75759 Specifications

General

Brand	Toro
Model	75759
Category	Lawn Mower
Language	English

Summary

Safety

Safety Alert Symbol

Identifies important safety messages in the manual and on the machine that must be followed to avoid accidents.

General Safety

Provides critical safety instructions for operating the machine to prevent injury or death.

Slope Indicator

Safety and Instructional Decals

Battery Symbols

Explains various symbols related to the battery, covering hazards and precautions for safe handling.

Manufacturer's Mark

Indicates that a blade is identified as a part from the original machine manufacturer.

Smart Speed Control System

MyRIDE Suspension System

Product Overview

Controls

Control Panel

Details the components of the control panel, including throttle, choke, blade switch, and key switch.

Key Switch Operation

Explains the function of the key switch for starting and shutting off the engine.

Throttle Control Operation

Describes how to use the throttle control for engine speed, from SLOW to FAST positions.

Choke Control Operation

Explains the use of the choke control for starting a cold engine.

Blade-Control Switch (PTO)

Details the function of the blade-control switch for engaging and disengaging power to mower blades.

Motion-Control Levers Operation

Explains how to use the motion-control levers for forward, reverse, and turning.

Park Position

Instructions on moving motion-control levers to PARK position when exiting or stopping the machine.

MyRider™ Adjustment Lever

How to use the MyRide™ adjustment lever to adjust seat suspension for comfort.

Smart Speed™ Control System Lever

Describes the Smart Speed™ lever for selecting 3 ground speed ranges: trim, tow, and mow.

Fuel-Presence Window

Explains how to use the fuel window to verify the presence of fuel in the tank.

Operation

Before Operation

Details pre-operation checks and safety procedures to ensure safe and proper use of the machine.

Before Operation Safety

Covers essential safety precautions before starting the machine, including terrain evaluation and PPE.

Pre-Start Checks

Fuel Safety Precautions

Adding Fuel

Recommended Fuel

Specifies the type of unleaded gasoline required, including octane rating and ethanol limits.

Using Fuel Stabilizer/Conditioner

Explains how to use fuel stabilizer/conditioner to keep fuel fresh, avoiding alcohol-based types.

Filling the Fuel Tank

Step-by-step guide on safely filling the fuel tank, including proper procedures and checks.

Performing Daily Maintenance

Breaking in a New Machine

Safety-Interlock System Operation

Testing the Safety-Interlock System

Provides a step-by-step guide to test the safety-interlock system before each use.

Positioning the Seat

Adjusting the MyRide™ Suspension System

Adjusting Motion-Control Levers

During Operation

During Operation Safety

Covers essential safety precautions to follow while operating the machine, including heat and exhaust hazards.

General Operation Safety

Emphasizes operator attention, avoiding distractions, and personal protective equipment during operation.

Slope Safety Guidelines

Towing Safety

Operating the Blade-Control Switch (PTO)

Operating the Throttle

Operating the Choke

Starting the Engine

Shutting Off the Engine

Using Motion-Control Levers for Driving

Driving the Machine

Driving Forward

Instructions on how to drive the machine forward by pushing the motion-control levers forward.

Driving Backward

Instructions on how to drive the machine backward by pulling the motion-control levers rearward.

Using the Smart Speed™ Control System

Explains how to use the Smart Speed™ lever to select 3 ground speed ranges: trim, tow, and mow.

Using the Side Discharge

Adjusting the Height of Cut

Adjusting Anti-Scalp Rollers

Operating Tips

Using Fast Throttle Setting

Recommends using the FAST throttle setting for best mowing and maximum air circulation.

Cutting a Lawn for the First Time

Advice on cutting grass for the first time, focusing on height adjustment to avoid scalping.

Cutting One-Third of Grass Blade

Best practice for cutting grass to remove only about one-third of the blade length for optimal results.

Alternating Mowing Direction

Suggests alternating mowing direction to keep grass standing straight and aid decomposition.

Mowing at Correct Intervals

Guidance on adjusting mowing frequency based on grass growth rates throughout the year.

Using Slower Cutting Speed

Recommends using a slower ground speed for improved cut quality in certain conditions.

Avoiding Cutting Too Low

Advises raising cutting height on uneven turf to prevent scalping.

Stopping the Machine While Mowing

Tips on how to stop the machine while mowing to avoid clumping clippings on the lawn.

Keeping Mower Deck Underside Clean

Emphasizes cleaning the underside of the mower deck after each use to maintain cutting quality.

Maintaining the Blade(s)

Highlights the importance of sharp blades for quality cuts and advises on checking for wear and damage.

After Operation

After Operation Safety

Covers essential safety steps after operating the machine, including parking, engine shutdown, and cleaning.

General Post-Operation Safety

Ensures safe practices after use, such as parking, engine shutdown, and keeping the machine clean.

Transporting the Machine

Provides instructions on safely transporting the machine using a trailer or truck.

Loading the Machine

Details the procedures and safety precautions for loading the machine onto a trailer or truck.

Pushing the Machine by Hand

Pushing the Machine

Steps to disengage the electric brake and push the machine manually.

Operating the Machine (Manual Push)

Details on moving bypass levers to lock them in place for manual pushing.

Maintenance

Maintenance Safety Precautions

Crucial safety warnings and precautions to follow before, during, and after performing maintenance.

Recommended Maintenance Schedule

Pre-Maintenance Procedures

Raising the Machine for Service

Lubrication

Greasing the Bearings

Details the process and interval for greasing caster wheel bearings with No. 2 lithium grease.

Engine Maintenance

Engine Safety

Safety instructions for working on the engine, emphasizing shutdown and avoiding hot surfaces.

Servicing the Air Cleaner

Instructions for servicing the air cleaner, including cleaning and replacing the paper element.

Removing the Air-Cleaner Paper Element

Steps to remove the paper air cleaner element, preventing dirt entry into the engine.

Servicing the Paper Air-Cleaner Element

Guidance on cleaning and inspecting the paper air cleaner element, and when to replace it.

Servicing the Engine Oil

Engine Oil Specifications

Lists the required engine oil type, crankcase capacity, and viscosity recommendations.

Checking the Engine-Oil Level

Procedure for checking the engine oil level when the engine is cold, ensuring proper lubrication.

Changing the Engine Oil

Step-by-step guide for changing the engine oil at specified service intervals.

Changing the Engine-Oil Filter

Servicing the Spark Plug

Removing the Spark Plug

Procedure for removing the spark plug for inspection or replacement.

Checking the Spark Plug

Guidance on inspecting the spark plug condition and setting the correct air gap.

Installing the Spark Plug

Instructions for installing the spark plug, including torque specifications.

Cleaning the Cooling System

Steps for cleaning the engine cooling system, including removing the air filter and shroud.

Fuel System Maintenance

Replacing the In-Line Fuel Filter

Procedure for replacing the in-line fuel filter at the recommended service interval.

Electrical System Maintenance

Electrical System Safety

Safety warnings and precautions for working with the electrical system and battery.

Servicing the Battery

Instructions for servicing the battery, including removal and installation precautions.

Removing the Battery

Steps for safely removing the battery from the machine, noting terminal disconnection order.

Charging the Battery

Installing the Battery

Servicing the Fuses

Drive System Maintenance

Checking Tire Pressure

Procedure for checking tire pressure to ensure proper inflation and an even cut.

Releasing the Electric Brake

How to manually release the electric brake by rotating the shaft on the brake control module.

Adjusting the Tracking

Procedure for adjusting the tracking if the machine pulls to one side when driving forward.

Belt Maintenance

Inspecting the Belts

Guidance on inspecting belts for wear, cracks, or other signs of damage.

Replacing the Mower Belt

Steps for replacing the mower belt, including identifying signs of a worn belt.

Mower Maintenance

Blade Safety

Critical safety information regarding mower blades, potential hazards, and repair limitations.

Servicing the Cutting Blades

Advice on keeping blades sharp for superior cut quality and convenient sharpening/replacement.

Before Inspecting or Servicing Blades

Procedure to follow before inspecting or servicing the mower blades.

Inspecting the Blades

Guidance on inspecting blades for sharpness, wear, nicks, cracks, or slot formation.

Checking for Bent Blades

Removing the Blades

Sharpening the Blades

Installing the Blades

Leveling the Mower Deck

Checking Side-to-Side Deck Level

Procedure to check if the mower deck is level from side to side.

Checking Front-to-Rear Blade Slope

Procedure to check the front-to-rear slope of the mower deck blades.

Leveling Mower Deck Side to Side

Adjusting Front-to-Rear Blade Slope

Removing the Mower Deck

Installing the Mower Deck

Cleaning

Washing Underside of Mower Deck

Procedure for washing the underside of the mower deck after each use to prevent grass buildup.

Disposing of Waste

Guidance on proper disposal of engine oil, batteries, and fluids according to regulations.

Storage

Storage Safety

Safety precautions to follow before storing the machine, including cooling the engine and avoiding flammable areas.

Cleaning and Storage Preparation

Comprehensive steps for cleaning and preparing the machine for storage, including fuel and battery care.

Storing the Battery

Battery Storage Tips

Troubleshooting

Fuel Tank Issues

Addresses issues with the fuel tank collapsing or the machine running out of fuel unexpectedly.

Engine Overheating

Troubleshooting steps for an engine that overheats, checking load, oil, and cooling passages.

Starter Not Cranking

Diagnosing why the starter motor does not crank, checking switch, battery, and electrical connections.

Engine Start/Run Issues

Resolving issues with the engine not starting, starting hard, or failing to keep running.

Engine Loses Power

Troubleshooting steps when the engine loses power, checking load, air cleaner, and fuel system.