EasyManua.ls Logo

Toro 75951 - User Manual

Toro 75951
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FormNo.3424-649RevC
ZMaster
®
Professional5000or
6000SeriesRidingMower
with48in,52in,60in,or72inTURBOFORCE
®
Mower
ModelNo.74904—SerialNo.403247209andUp
ModelNo.74906—SerialNo.403247600andUp
ModelNo.74918—SerialNo.403227053andUp
ModelNo.74926—SerialNo.403005770andUp
ModelNo.74928—SerialNo.403247229andUp
ModelNo.74930—SerialNo.403319739andUp
ModelNo.74943—SerialNo.403011067andUp
ModelNo.74945—SerialNo.403226784andUp
ModelNo.75951—SerialNo.403319953andUp
ModelNo.75955—SerialNo.404971756andUp
ModelNo.78926—SerialNo.403137993andUp
ModelNo.78928—SerialNo.402320000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3424-649*

Table of Contents

Questions and Answers

  • L
    Linda HorneSep 5, 2025
    Why aren't the blades rotating on my Toro 75951 Lawn Mower?
    • T
      Theodore EdwardsSep 5, 2025
      If the blades on your Toro Lawn Mower aren't rotating, check the following: replace the deck belt if it is damaged, worn, loose, or broken. Install the mower belt on the deck pulley and check the idler pulley, idler arm, and spring for correct position and function. Check the belt tension or install a new belt if the pump drive belt is worn, loose, or broken. Replace the spring if the idler spring is broken or missing.
  • U
    usimmonsSep 4, 2025
    What causes the blades on my Toro 75951 not to rotate?
    • Z
      Zachary RussellSep 5, 2025
      If the blades on your Toro Lawn Mower aren't rotating, consider these possibilities: * The mower deck belt is worn, loose, or broken; install a new deck belt. * The mower deck belt is off the pulley; install the mower deck pulley and check the idler pulley, idler arm, and spring for correct position and function. * The pump drive belt is worn, loose, or broken; check the belt tension or install a new belt. * The idler spring is broken or missing; replace the spring.
  • D
    Debbie FrederickSep 4, 2025
    What to do if my Toro 75951 doesn't drive?
    • E
      Erica BrownSep 4, 2025
      If your Toro Lawn Mower isn't driving, check these potential issues: * Ensure the bypass valves are tightly closed. * Change the pump belt if it's worn, loose, or broken. * If the pump belt is off a pulley, change the belt. * Replace the spring if the idler spring is broken or missing. * Add hydraulic oil to reservoirs or let it cool down if the hydraulic oil level is low or too hot.
  • M
    matthewalvaradoSep 4, 2025
    Why do the blades not rotate on my Toro 75951?
    • R
      Roy ClarkSep 4, 2025
      If the blades of your Toro Lawn Mower do not rotate, install a new deck belt if the mower deck belt is worn, loose, or broken. Install the mower deck pulley and check the idler pulley, idler arm, and spring for correct position and function if the mower deck belt is off the pulley. Check the belt tension or install a new belt if the pump drive belt is worn, loose, or broken. Replace the spring if the idler spring is broken or missing.
  • J
    Janice MartinSep 4, 2025
    What causes uneven cutting height on my Toro 75951?
    • J
      Jessica AtkinsSep 4, 2025
      Uneven cutting height on your Toro Lawn Mower can stem from several issues. Start by checking if the blades are sharp and sharpen them if necessary. Inspect the cutting blades for any bending and replace them if bent. Ensure the mower deck is level from side-to-side and front-to-rear. Clean the underside of the mower deck if it's dirty and adjust the tire pressure to the correct levels.
  • C
    Casey ClarkSep 3, 2025
    Why does the engine lose power in my Toro Lawn Mower?
    • M
      martinconnieSep 3, 2025
      If your Toro Lawn Mower engine loses power, first reduce the ground speed, as the engine load may be excessive. Next, clean the air-cleaner element. If the oil level in the crankcase is low, add oil. Remove any obstructions from the cooling fins and air passages above the engine. Clean or replace the fuel cap if the vent hole is plugged. Finally, replace the fuel filter if it is dirty.
  • B
    Brendan DyerSep 3, 2025
    How to fix uneven cutting height on my Toro 75951?
    • C
      connor95Sep 3, 2025
      If the cutting height is uneven on your Toro Lawn Mower, consider these possibilities: * Sharpen the blade(s) if they are not sharp. * Install a new cutting blade(s) if the current ones are bent. * Level the mower from side-to-side and front-to-rear. * Adjust the anti-scalp wheel height if an anti-scalp roller (if applicable) is not set correctly. * Clean the underside of the mower deck if it is dirty. * Adjust the tire pressure if it is incorrect.
  • A
    allison95Sep 3, 2025
    How to fix a starter that won't crank on my Toro 75951 Lawn Mower?
    • C
      cgonzalezSep 3, 2025
      If the starter on your Toro Lawn Mower won't crank, check these items: * Ensure the blade-control switch is disengaged. * Engage the parking brake. * Move the motion-control levers to the NEUTRAL-LOCK position. * Make sure you are sitting in the operator’s seat. * Charge the battery if it's dead. * Check the electrical connections for good contact. * Replace the fuse if it's blown.

Toro 75951 Specifications

General IconGeneral
Model75951
Engine Displacement163 cc
EngineBriggs & Stratton
Cutting Width56 cm
Weight38.1 kg
Start TypePull Start
Drive TypeSelf-Propelled
Drive SystemRear-Wheel Drive
Fuel Tank Capacity0.95 L
Cutting Height1.25 - 3.75 inches
Warranty2 Years

Related product manuals