5
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
94-2560
1. Cutting/dismemberment
in impeller hazard—stay
away from moving parts,
stop the engine, and
remove the key before
performing maintenance
94-2561
1. Hot surface; do not touch 2. Stay a safe distance from
the machine
94-2562
1. Cutting/dismemberment
in auger hazard—stay
away from moving parts,
stop the engine, and
remove the key before
performing maintenance
94-2577
1. Squeeze the control bar
to engage the rotor
blades
2. Release the control bar to
release the rotor blades
To Next Page
Loading...
Need help?
General
