Toro DH 200 - Installing the Steering Wheel; Installing the Seat

1
InstallingtheSteeringWheel
Partsneededforthisprocedure:
1
SteeringWheel
1LockWasher
1Nut
Procedure
1.Positionthefrontwheelsstraightahead.
2.Removethelogocoverbyreleasingthe3latches
fromthebacksidewithascrewdriver.
3.Lineupthecenterspoketowardtheseatandposition
thesteeringwheelontotheshaftspline(Figure1).
Figure1
1.Centerspoke
4.Nut
2.Shaftspline
5.Logocover
3.Lockwasher
4.Securethesteeringwheelwithalockwasherandnut
(Figure1).
5.Torquethesteeringwheelnutto50ft-lb(37N-m).
6.Snapthelogocoverintoplace(Figure1).
2
InstallingtheSeat
Partsneededforthisprocedure:
1
Seat
2Bolts
2FlatWashers
2
SpringWashers
Procedure
1.Removetheplasticcoverfromtheseatanddiscardit.
2.Loosenthetwoboltsontheseathinges.
3.Settheseatinplaceandsecureitwiththetwobolts,
springwashers,andatwashers(Figure2).
Figure2
1.Safetyswitch
2.Boltandwashers
4.Ensurethatthesafetyswitchisconnectedtotheseat
(Figure2).
2