Toro Reelmaster 5100-D User Manual

Using the Diagnostic ACE
TM
Reelmaster
®
5100-D/5300-D
Part No. 92800SL, Rev. B
Commercial Products

Toro Reelmaster 5100-D Specifications

General

Brand	Toro
Model	Reelmaster 5100-D
Category	Lawn Mower
Language	English

Summary

Controller Diagnostic Lamp

Diagnostic Lamp: Blinking ON/OFF

Troubleshooting when the controller diagnostic lamp blinks, indicating circuit issues.

Diagnostic Lamp: OFF Indicator

Troubleshooting when the controller diagnostic lamp is off, indicating power or ECU issues.

Installing the Diagnostic ACE Device

Testing Machine Inputs with Diagnostic ACE

Input Test: Key Run Function

Verifies the status of the Key Run input using the Diagnostic ACE.

Input Test: Traction Neutral Sensor

Verifies the status of the Traction Neutral input using the Diagnostic ACE.

Input Test: Seat Switch Status

Verifies the status of the Seat Switch input using the Diagnostic ACE.

Input Test: Engine Hot Sensor

Verifies the status of the Engine Hot input using the Diagnostic ACE.

Input Test: Raise/Lower Function

Verifies the status of the Raise/Lower input using the Diagnostic ACE.

Input Test: Enable/Disable Switch

Verifies the status of the Enable/Disable input using the Diagnostic ACE.

Input Test: Front Unit Down Signal

Verifies the status of the Front Unit Down input using the Diagnostic ACE.

Input Test: Front Backlap Control

Verifies the status of the Front Backlap input using the Diagnostic ACE.

Input Test: Rear Backlap Control

Verifies the status of the Rear Backlap input using the Diagnostic ACE.

Input Test: Lower/Mow/Start Function

Verifies the status of the Lower/Mow/Start input using the Diagnostic ACE.

Input Test: 5/8 Blade Setting

Verifies the status of the 5/8 Blade setting input using the Diagnostic ACE.

Input Test: Front Reel Speed Signal

Verifies the status of the Front Reel Speed input using the Diagnostic ACE.

Input Test: Rear Reel Speed Signal

Verifies the status of the Rear Reel Speed input using the Diagnostic ACE.

Input Test: Traction Speed Signal

Verifies the status of the Traction Speed input using the Diagnostic ACE.

Input Test: Height-of-Cut Selector Calibration

Calibrates the Height-of-Cut selector by testing its input interpretation.

Testing Machine Outputs with Diagnostic ACE

Output Test: Speed Out of Range Signal

Verifies the status of the Speed Out of Range output using the Diagnostic ACE.

Output Test: Backlap Solenoids S8/S9

Verifies the status of the Backlap solenoids S8 and S9 using the Diagnostic ACE.

Output Test: Rear Reels On/Off Signal

Verifies the status of the Rear Reels On/Off output using the Diagnostic ACE.

Output Test: Front Wing Lift/Lower Signal

Verifies the status of the Front Wing Lift/Lower output using the Diagnostic ACE.

Output Test: Center Unit Lift/Lower Signal

Verifies the status of the Center Unit Lift/Lower output using the Diagnostic ACE.

Output Test: Rear Unit Lift/Lower Signal

Verifies the status of the Rear Unit Lift/Lower output using the Diagnostic ACE.

Output Test: Lower Cutting Unit Signal

Verifies the status of the Lower Cutting Unit output using the Diagnostic ACE.

Output Test: ETR/ALT Raise Signal

Verifies the status of the ETR/ALT Raise output using the Diagnostic ACE.

Output Test: Front Reel Speed Control

Verifies the status of the Front Reel Speed output using the Diagnostic ACE.

Output Test: Rear Reel Speed Control

Verifies the status of the Rear Reel Speed output using the Diagnostic ACE.

Output Test: Front Reels On/Off Signal

Verifies the status of the Front Reels On/Off output using the Diagnostic ACE.

Output Test: Engine Start Relay Activation

Verifies the status of the Engine Start Relay output using the Diagnostic ACE.

Output Test: Glow Relay Activation

Verifies the status of the Glow Relay output using the Diagnostic ACE.

Reelmaster Electrical System Diagram

Reelmaster Hydraulic System Diagram