Toro Reelmaster 5 Blade - User Manual

Operator’s Manual
English (EN)
Form No. 3312–270 Rev. H
Reelmaster 5, 7, & 11 Blade
Model No. 01005—Serial No. 40001 thru 70001 and Up
Model No. 01007—Serial No. 40001 thru 70001 and Up
Model No. 01011—Serial No. 40001 thru 70001 and Up

Summary

Introduction

General Specifications

Setting Up Instructions

Check Wheel Hubs And Install Wheels

Gear Case Oil

Procedure for checking and filling gear case oil.

Critical Adjustments

Check Reel Bearings And Mower Fasteners

How to check reel bearings and tighten all fasteners for secure operation.

Parallel Bedknife To Reel

Steps to align the bedknife parallel to the reel for optimal cutting.

Set Height Of Cut

Reel Bearing Adjustment

Operating Instructions

Adjust Bedknife To Reel For Light Contact

Procedure to adjust bedknife for light contact with reel for sharp cutting.

Mower Use

Causes of Poor Quality of Cut

Bedknife;Reel Contact

How bedknife/reel contact affects cut quality and wear.

Noise

Maintenance

Lubrication

Grinding

Mower Servicing Procedure Disassembly

Gear Case And Frame Assembly

Toro Reelmaster 5 Blade Specifications