Setup
Step
1
Installing the Valve Lever
Parts needed for this step:
1
Speed selector valve lever
Procedure
1. R emo v e and discard the n ut securing the bolt
and loc k w asher to the speed selector lev er .
2. Secure the lev er to the speed selector v alv e
using the bolt and loc k w asher as illustrated
in Figure 3 .
Figure 3
1. Speed selector valve lever 2. Speed selector valve
Step
2
Checking Fluid Levels and
Drive Chain Tension
No Parts Required
Procedure
Before star ting the engine for the first time , c hec k
the engine oil and h y draulic fluid lev els and the
traction dri v e c hain tension. R efer to Operation
and Maintenance for more infor mation.
Step
3
Charging the Battery
No Parts Required
Procedure
Warning
CALIFORNIA
Pr oposition 65 W ar ning
Batter y posts, ter minals, and r elated
accessories contain lead and lead
compounds, chemicals kno wn to the State of
Calif or nia to cause cancer and r epr oducti v e
har m. W ash hands after handling .
11
To Next Page
Loading...
