Toro ECXTRA - Basic Timer Operations; To Set or Change Time;Date; To Change a Watering Day Schedule

To Set or Change Time/Date:
1. Turn the control dial to the
current time/day position.
2. To adjust the flashing portion of the
display, press the +/
on or –/off button.
3. Press the
next button.
4. Repeat steps 2 and 3 to set the following
current information: minutes,
year,
month, and day.
5. Return the control dial to
run .
To Change a Watering Day Schedule:
Calendar Schedule
1. Turn the control dial to the
watering days position.
2. Set the
programs switch as necessary
to select the desired program.
3. Press the +/
on or –/off button as needed
to select
CAL.
4. Press the next button.
5. To select the day (flashing), press the
+/
on button. To remove the day, press
the –/
off button. Repeat this step until
only the desired watering days are shown.
6. Return the control dial to
run .
Basic ECXTRA Timer Operations
9