Toro GREENSMASTER 3100 - Page 66

Greensmaster 3100
Page 4 – 41.3
Repairs
Rev. D
Reel Motor 105–9770 Repair (Fig. 18b)
1. Rear cover
2. Drive gear
3. Seal
4. Tab washer
5. Pressure seal
6. Back–up ring
7. O–ring
8. Body
9. Idler gear
10. Cap screw
11. Front flange
Figure 18b
7
4
3
1
2
5
6
9
10
11
(45 to 55 Nm)
33 to 40 ft–lb
8
5
6
7
Disassembly
1. Plug motor ports and clean the outside of the motor
thoroughly. After cleaning, remove plugs and drain any
oil out of the motor.
2. Use a marker or scribe to make a diagonal mark
across the front flange, body, and rear cover for reas-
sembly purposes (Fig.18c).
Figure 18c
DIAGONAL MARK