Greensmaster 3300/3400Page 7 -- 18Chassis
Tank Mount Plate Assembly
1. Tank mount plate assembly (GR3300)
2. Suction hose (to gear pump)
3. Flange head screw (2 used)
4. Flat washer (2 used)
5. Flange head screw (2 used)
6. Frame (GR3300)
7. Tank mount plate assembly (GR3400)
8. Suction hose (to gear pump)
9. Frame (GR3400)
10. Flange head screw (4 used)
11. Clip (2 used)
Figure 15
8
9
7
11
10
10
FRONT
RIGHT
3
3
1
4
5
2
6
GREENSMASTER 3300 GREENSMASTER 3400
NOTE: For access to fasteners that secure hydraulic
reservoirandfueltankandalsotoaccessmachinecom-
ponents at rear of machine (e.g. steering cylinder, rear
steeringfork),thetankmountplateassembly(hydraulic
reservoir, fuel tank and tankmount plate) can be raised
and supported. If necessary, the complete tank mount
plate assembly can be removed from the machine.
CAUTION
Before disconnecting any hydraulic hoses, read
and become familiar with General Precautions
for Removing and Installing Hydraulic System
Components in the Service and Repairs section
of Chapter 5 -- Hydraulic System.
To Next Page
Loading...
