Do you have a question about the Toro Greensmaster TriFlex 3400 Series and is the answer not in the manual?
Brand | Toro |
---|---|
Model | Greensmaster TriFlex 3400 Series |
Category | Lawn Mower |
Language | English |
Describes the safety alert symbol for hazards.
General guidelines for safe mower operation.
Steps before operating the machine.
How to operate the machine.
Proper usage and upkeep of the ROPS.
Safety measures for handling gasoline.
Ensuring equipment integrity and cleanliness.
Additional safety guidelines for Toro products.
Daily checks for proper operation.
Locating and replacing damaged decals.
Diagram of control levers and pedals.
Explains warning and status lights.
Warnings related to operation and hazards.
Precautions for slopes.
List of parts to check upon delivery.
Steps to activate the battery with electrolyte.
Precautions to avoid short circuits.
Greasing the drive coupler and installing roller.
Mounting the reel motor into the cutting unit.
Labeled diagram of the machine.
Functions and operation of the traction pedal.
Adjusting engine speed and ground speeds.
Operating the cutting units.
Operation of the parking brake.
How to use the backlap lever.
Emphasizes reading safety instructions.
Steps to check and add engine oil.
Safety measures during fueling.
Precautions for using biodiesel blends.
Procedure to check coolant level.
Steps to check hydraulic fluid level.
Steps to start the engine.
Procedures to verify interlock function.
Procedure for installing cutting units.
Procedure for removing cutting units.
Aligning cuts for optimal appearance.
Warnings about stopping reels on the green.
Limitations and recommendations for towing.
Table of service intervals and procedures.
Procedure for servicing the air cleaner filter.
Servicing the fuel filter/water separator.
Battery maintenance and precautions.
Location and layout of fuses.
Procedure to correct creeping.
Procedure to clean the radiator screen.
Procedure for brake adjustment.
Procedure for belt tension adjustment.
Procedure for oil and filter change.
Procedure for backlapping reels.
Accessing error codes.
Draining fuel and oil, replacing filter.
Owner's duties for maintenance.