Need help?Do you have a question about the Toro Groundsmaster 228–D and is the answer not in the manual?
General| Manufacturer | Toro |
|---|---|
| Fuel | Diesel |
| Cutting Width | 72 inches |
| Transmission | Hydrostatic |
| Number of Blades | 3 |
| Deck Lift | Hydraulic |
| Model | Groundsmaster 228–D |
| Cutting Height | 1 - 5 inches |
Instructions for safe operation and preparation based on ANSI standard B71.4-1999.
Safety information specific to Toro products, supplementing ANSI standards.
Detailed technical specifications for the engine, electrical, transmission, and axles.
Steps to check the engine oil level and add oil if necessary.
Procedure to check the coolant level in the expansion tank and replenish if needed.
Guidance on checking hydraulic system fluid level and recommended oil types.
Explanation of how the service brakes work, including independent and combined use.
Instructions for engaging and disengaging the parking brake.
Description of the traction pedal functions for forward and reverse movement and speed control.
Explanation of the hydraulic lift lever positions for controlling the cutting unit.
How to use the throttle to control engine speed and ground speed.
Key indicators and warning lights on the control panel, including oil pressure, coolant temperature, and charge status.
Instructions for adjusting both standard and deluxe seats for operator comfort.
Procedure to purge air from the fuel system after maintenance or if the engine stops.
Instructions for lubricating all grease fittings, bearings, and bushings on the traction unit.
A schedule outlining maintenance tasks based on operating hours for optimal machine performance.
Procedure for draining and cleaning the fuel tank.
Checking fuel lines and connections for damage or deterioration.
Procedure for draining the water separator daily.
Procedure for checking the PTO belt tension.
Steps for replacing the PTO belt.
Steps for cleaning and preparing the traction unit for storage.
Procedures for preparing the engine for storage, including draining fluids and sealing openings.
Defines covered products, warranty terms, and conditions for claims.
Outlines owner duties, items not covered, and warranty limitations.
Guidance on warranty service, parts, and policies for international customers.
To Next Page
