Note:Thebrakelightswillcomeonwhenthe
machineisslowingdownfromthehydrostatic-dynamic
brakingorwhenthebrakespedalsarepressed.
1.Turnthekeyswitch.
2.Rotatethelightswitch(Figure45andFigure46)
tothefollowingpositions:
•Lowbeam
•OFFposition
•Lowbeam
UsingtheTurnSignal
•Movetheturnsignalswitch(Figure45)upto
signalarightturn.
•Movetheswitchdowntosignalaleftturn.
•Movetheswitchtothemiddlepositiontoshutoff
theturnsignals.
UsingtheHorn
Pressthehornbutton(Figure45)tosoundthehorn.
UsingtheHazardLights
Thehazardlightsaretheashinglightsthatwarnthe
machineisstationaryormovingslow.
g351460
Figure47
1.Hazardswitch
•Pressthetopoftheswitch(Figure47)torunthe
hazardlights.
Note:Thehazardswitchilluminateswhen
runningthehazardlights.
•Pressthebottomoftheswitchtoshutoffthe
hazardlights.
AdjustingtheHeadlights
1.Loosenthemountinglocknutsandcapscrewsto
adjustthelights(Figure48).
g351458
Figure48
1.Capscrew(horizontallight
adjustment)
3.Locknutandcapscrew
(verticallightadjustment)
2.Locknut(horizontallight
adjustment)
2.Adjustthelightsperlocalstandards.
3.Tightenthelocknutsandcapscrews(Figure48).
24