Toro Groundsmaster 7210 - Page 3

g320860
Figure1
1.5cm(2inches)3.Drill9/32inchdiameter
holes.
2.Mountingbracket
4.Checkhereforexisting
holes.
4.Usingthemountingbracketasatemplate,mark
thelocationoftheholetodrill(Figure1).
5.Drill9/32inchholesintothemachineframe
(Figure1).
6.Installthemountingbrackettothemachine
framewith2bolts(1/4x3/4inch)and2ange
nuts(1/4inch).
3