Toro Groundsmaster 4010 - User Manual

FormNo.3411-340RevC
Groundsmaster
®
4000or4010
RotaryMower
ModelNo.30609—SerialNo.400000000andUp
ModelNo.30636—SerialNo.400000000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3411-340*C

Toro Groundsmaster 4010 Specifications

General

Brand	Toro
Model	Groundsmaster 4010
Category	Lawn Mower
Language	English

Summary

Safety

General Safety

General safety precautions for operating and maintaining the machine.

Product Overview

Controls

Identification and function of operator controls like pedals, switches, and levers.

Operation

Before Operation Safety

Critical safety guidelines to follow before operating the machine.

Fuel Safety

Checking the Engine-Oil Level

Filling the Fuel Tank

Fuel Specification

Details the required diesel fuel specifications for optimal performance.

Adjusting the Rollover Protection System (ROPS)

Lowering the Roll Bar

Raising the Roll Bar

Adjusting the Height of Cut

Front Mower Deck Height Adjustment

Checking the Safety-Interlock Switches

During Operation

Operation Safety and Slope Guidelines

Essential safety practices for operation, including ROPS and slope handling.

Starting and Shutting Off the Engine

Starting the Engine

Step-by-step procedure for safely starting the machine's engine.

Shutting Off the Engine

Procedure for properly shutting down the machine's engine.

Cutting Grass with the Machine

Diesel Particulate Filter Regeneration

DPF Soot Accumulation

Engine Warning Messages-Soot Accumulation

DPF Ash Accumulation

InfoCenter Advisory and Engine Warning Messages-Ash Accumulation

Types of Diesel Particulate Filter Regeneration

DPF Regeneration Types During Operation

DPF Regeneration Types Requiring Parking

Passive DPF Regeneration

Assist DPF Regeneration

Reset Regeneration

Parked Regeneration

Preparing for Parked or Recovery Regeneration

Performing a Parked Regeneration

Recovery Regeneration

Adjusting the Mowing Speed

Adjusting the Transport Speed

Operating Tips

Operating the Machine

After Operation Safety

Pushing or Towing the Machine

Maintenance

Recommended Maintenance Schedule(s)

Schedule of maintenance tasks based on operating hours.

Pre-Maintenance Procedures

Pre-Maintenance Safety

Safety precautions to take before performing any maintenance.

Lubrication

Greasing the Bearings and Bushings

Engine Maintenance

Engine Safety

Safety precautions specific to engine maintenance.

Servicing the Engine Oil

Steps for checking and changing engine oil, including specifications.

Servicing the Air Cleaner

Servicing the Diesel-Oxidation Catalyst (DOC) and the Soot Filter

Fuel System Maintenance

Fuel System Service Procedures

Servicing the Fuel Filter

Electrical System Maintenance

Electrical System Safety

Safety precautions for working on the electrical system.

Servicing the Battery

Drive System Maintenance

Changing the Planetary-Gear-Drive Oil

Changing the Rear-Axle Oil

Cooling System Maintenance

Cooling System Safety

Safety precautions related to the engine cooling system.

Checking the Cooling System

Servicing the Engine-Cooling System

Brake Maintenance

Adjusting the Service Brakes

Hydraulic System Maintenance

Hydraulic System Safety

Safety precautions for working on the hydraulic system.

Checking the Hydraulic Fluid

Changing the Hydraulic Fluid

Replacing the Hydraulic Filters

Mower Maintenance

Adjusting the Mower-Deck Pitch

Blade Maintenance

Blade Safety

Safety precautions when handling mower blades.

Checking for a Bent Blade

Removing and Installing the Mower Blade(s)

Inspecting and Sharpening the Mower Blade(s)

Cab Maintenance

Storage

Preparing for Seasonal Storage