Toro Groundsmaster 4010 - Locating the Jacking Points; Hauling the Machine; Locating the Tie-Down Points

g020454
Figure60
1.Bypassvalve(2)
2.Rotateeachvalve3turnscounter-clockwiseto
openandallowoiltobypassinternally.
Note:Donotopenmorethan3turns.Because
uidisbypassed,themachinecanbeslowly
movedwithoutdamagingthetransmission.
3.Closethebypassvalvesbeforestartingthe
engine.
4.Torqueto70N∙m(52ft-lb)toclosethevalve.
Important:Topushortowthemachineinreverse,
youmustbypassthecheckvalveinthe4-wheel
drivemanifold.Tobypassthecheckvalve,
connectahoseassemblytothereversetraction
pressuretestport,locatedonthehydrostat,and
ontheportlocatedbetweenportsM8andP2on
thereartractionmanifold,whichislocatedbehind
thefronttire.Thehoseassemblyincludes1hose
(PartNo.95-8843),2couplerttings(PartNo.
95-0985),and2hydraulicttings(PartNo.340-77).
LocatingtheJackingPoints
Therearejackingpointslocatedatthefrontandrear
ofthemachine.
DANGER
Mechanicalorhydraulicjacksmayfailto
supportmachineandcauseaseriousinjury.
•Usejackstandswhensupportingmachine.
•Donotusehydraulicjacks.
•Ontheframeattheinsideofeachfrontdrivetire
•Atthecenteroftherearaxle
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurelyusingstraps,
chains,cable,orropes.Bothfrontandrearstraps
shouldbedirecteddownandoutwardfromthe
machine.
LocatingtheTie-Down
Points
Therearetiedownslocatedatthefrontandrearsides
ofthemachine(Figure61).
Note:Useproperly-ratedDOT-approvedstrapsin4
cornerstotiedownthemachine.
•2onthefrontoftheoperator'splatform
•Rearbumper
g196910
Figure61
1.Reartie-downpoint2.Fronttie-downpoints
50