Toro Groundsmaster 4010 - Lubrication; Greasing the Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours—Lubricateallofthe
bearingsandbushings.
Every500hours/Yearly(whichevercomesrst)
Themachinehasgreasettingsthatyoumust
lubricateregularlywithNo.2lithiumgrease.Also,
lubricatethemachineimmediatelyafterevery
washing.
Thegrease-ttinglocationsandquantitiesare:
TractionUnit
•2frontandrear-axle-pivotbushings(Figure65)
•2steering-cylinder-balljoints(Figure66)
•2tie-rod-balljoints(Figure66)
•2king-pinbushings(Figure66).
Thetopttingonthekingpinshouldonlybe
lubricatedannually(2pumps).
g004687
Figure65
g011499
Figure66
FrontMowerDeck
•2caster-fork-shaftbushings(Figure67)
•3spindle-shaftbearings—locatedunderthepulley
(Figure68)
•2idler-arm-pivotbushings(Figure68)
g011557
Figure67
57