Toro Groundsmaster 4010 - Adjusting the Skids

7.Inserttheclevispinsandinstallthehairpin
cotters.
8.Rotatethetensionrodcounterclockwise(nger
tight)toputtensiononadjustment.
9.Removethehairpincottersandclevispins
securingthedamperlinkstothemower-deck
brackets(Figure30).
Important:Thedamper-linklengthshould
neverbeadjusted.Thelengthbetween
theholecentersshouldbe13.7cm(5-3/8
inches).
g011549
Figure30
1.Damperlink
10.Alignthedamper-linkholeswiththeselected
height-of-cutbracketholesinthemower-deck
frame,inserttheclevispins,andinstallthe
hairpincotters(Figure31).
decal100-5694nc
Figure31
AdjustingtheSkids
Mounttheskidsinthelowerpositionwhenoperating
atheightsofcutgreaterthan64mm(2-1/2inches)
andinthehigherpositionwhenoperatingatheights
ofcutlowerthan64mm(2-1/2inches).
Note:Whentheskidsbecomeworn,youcanswitch
themtotheoppositesidesofthemowerbyipping
themover.Thisallowsyoutousetheskidslonger
beforereplacingthem.
Adjusttheskids(Figure32).
Important:Torquethescrewatthefrontofeach
skidto9to11N·m(80to100in-lb).
g031063
Figure32
32