Toro GTS 150 - User Manual

OHV GTS 150 ENGINE SERVICE MANUAL
Table Of Contents – Page 1 of 4
PREFACE
SAFETY INFORMATION
SAFETY TIPS
SPECIFICATIONS
GTS 150 ENGINE SPECIFICATION
GTS 150 CARBURETOR SPECIFICATIONS
GTS 150 FASTENER TORQUES
TOOL REQUIREMENTS
TROUBLESHOOTING
ENGINE DOES NOT START WHEN "COLD"
ENGINE WILL START "COLD", BUT WILL NOT START "HOT"
ENGINE DOES NOT PRODUCE SPARK
ENGINE HAS LOW COMPRESSION
ENGINE FLOODED WITH FUEL
ENGINE LACKS POWER
BENT PUSH ROD
ENGINE SURGING
ENGINE BACK FIRES
ENGINE AFTER FIRES
ENGINE OVERHEATS
ENGINE VIBRATES EXCESSIVELY
ENGINE CRANKSHAFT WILL NOT TURN
ENGINE PRODUCES MECHANICAL KNOCKING SOUND
PRE-IGNITION
ENGINE SMOKES EXCESSIVELY
ENGINE STALLS
SPARK PLUG FOULED
GTS 150 MAINTENANCE
SERVICING AIR CLEANER
REPLACING THE SPARK PLUG
REMOVING GASOLINE FROM THE FUEL TANK
CHANGING CRANKCASE OIL
CARBURETOR - ADJUSTMENT
COMPRESSION - MEASUREMENT
THROTTLE - ADJUSTMENT
CLEAN THE ENGINE AND RECOIL STARTER
CLEAN THE COOLING SYSTEM
PREPARING THE ENGINE FOR STORAGE

Toro GTS 150 Specifications

General

Brand	Toro
Model	GTS 150
Category	Engine
Language	English

Summary

Preface

Safety Information

Safety Tips

Essential safety guidelines for operating and servicing the GTS 150 engine.

Specifications

GTS 150 Engine Specification

Detailed technical data for the GTS 150 engine, including bore, stroke, and displacement.

GTS 150 Carburetor Specifications

Technical details for the GTS 150 engine's carburetor, including jet sizes and materials.

GTS 150 Fastener Torques

Torque values for various fasteners used on the GTS 150 engine.

Tool Requirements

Troubleshooting

Engine Troubleshooting Guide

Common engine problems and their potential causes and remedies.

GTS 150 Maintenance

Maintenance Procedures

Step-by-step instructions for routine maintenance tasks on the GTS 150 engine.