Toro Lawn-Boy Precision Z330LX - Page 39

HYDRO-GEAR TRANSAXLE
TimeCutter

Z Service Manual 4 - 13
3. Remove the bolt and nut retaining the hydro rod to
the actuator arm (Figure 67).
Figure 67
mvc-150
4. Remove the nut on the brake link (Figure 68).
Figure 68
mvc-152
5. Remove the bolt and nut retaining the rear of the
hydro rod to the control arm and slide the hydro
rod towards the rear (Figure 69).
Figure 69
mvc-103
6. Unplug and remove the park brake switch from
the lower bellcrank bracket (Figure 70).
Figure 70
mvc-157
4