Toro LX423 - User Manual

Questions and Answers:

L
Lori ParkerAug 16, 2025
What to do if Toro LX423 will not mulch grass?
- K
  Kimberly TaylorAug 17, 2025
  If your Toro Lawn Mower won't mulch grass, consider these possibilities: * The engine speed may be too low. Place the throttle in the FAST (rabbit) position. * The grass may be wet. Avoid mulching when the grass is wet. * The grass may be excessively high. Mow once at a high cutting height, then mow again at the desired height, or make a narrower cutting swath. * The blade may be dull. Sharpen or replace the blade.
M
Mr. Alec BakerAug 20, 2025
Why Toro Lawn Mower engine idles rough?
- D
  Daniel AndersonAug 20, 2025
  A rough idling Toro Lawn Mower engine can be attributed to: * Spark plugs that are fouled, faulty, or have a gap that is too wide. Replace the spark plugs and set the plug gap. * A dirty air cleaner. Replace the air cleaner element and/or clean the pre-cleaner.
K
Kenneth DavisAug 25, 2025
What to do if Toro LX423 engine runs erratic?
- V
  Vincent HolmesAug 25, 2025
  If your Toro Lawn Mower engine runs erratically, consider the following: * If the tractor is running with the CHOKE activated, move the Throttle/Choke control out of the CHOKE position. * If spark plug wires are loose, connect them securely. * If the fuel line is blocked or the fuel is stale, clean the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. * If the vent in the gas cap is plugged, clear the vent or replace the cap if it's damaged. * If there is water or dirt in the fuel system, drain the fuel tank and refill it with clean, fresh gasoline. * If the air cleaner is dirty, replace the air cleaner paper element or clean the foam precleaner.
A
April GilbertAug 27, 2025
Why Toro LX423 engine overheats?
- E
  Eric OnealAug 27, 2025
  If your Toro Lawn Mower engine overheats, it could be due to: * Low engine oil level. Fill the crankcase with the proper amount and weight of oil. * Restricted airflow. Clean grass clippings and debris from around the engine’s cooling fins and blower housing.
K
Kristin BoydAug 31, 2025
What causes excessive vibration in Toro Lawn Mower?
- N
  Nicholas StephensAug 31, 2025
  Excessive vibration in your Toro Lawn Mower can be caused by: * A loose or unbalanced cutting blade. Tighten the blade and spindle. * A damaged or bent cutting blade. Replace the blade.
A
Ashley Jackson MDSep 4, 2025
Why Toro LX423 has an uneven cut?
- M
  marshallkristinaSep 4, 2025
  An uneven cut with your Toro Lawn Mower could be due to: * The deck not being leveled properly. Perform a side-to-side deck adjustment. * A dull blade. Sharpen or replace the blade. * Uneven tire pressure. Check the tire pressure in all four tires.
M
Mary OwensSep 8, 2025
What to do if Toro LX423 Lawn Mower engine hesitates at high RPM?
- G
  gregoryballSep 8, 2025
  If your Toro Lawn Mower engine hesitates at high RPM, it might be due to spark plug gaps that are too close. Remove the spark plugs and reset the gap.

Toro LX423 Specifications

General

Deck Material	Steel
Warranty	2 years limited
Cutting Height	1.5 - 4.5 in
Fuel Capacity	1.5 quarts
Fuel Tank Capacity	1.5 quarts

Summary

Finding Model Number

Locate and record the tractor's model and serial number for identification and support.

Customer Support

Contacting Customer Support

How to get help for assembly, operation, or maintenance issues.

Important Safe Operation Practices

General Operation

Instructions for safe operation, including reading the manual and operator responsibilities.

Important Safe Operation Practices

Slope Operation

Guidelines and warnings for safely operating the tractor on slopes.

Important Safe Operation Practices

Children Safety

Safety precautions regarding children around the tractor and operation.

Towing Guidelines

Guidelines for safely towing equipment with the tractor.

Safe Gasoline Handling

Precautions for handling gasoline safely due to its flammable nature.

Important Safe Operation Practices

General Service Practices

General safety practices for servicing and maintaining the tractor.

Engine Modification Warnings

Warning against modifying the engine for safety reasons.

Spark Arrestor Information

Information about the spark arrestor and its importance for safety.

Safety Labels

Console Functions

Explanation of the functions and controls located on the tractor's console.

Brake Pedal Operation

Description of the brake pedal operation and safety interlock.

Engage Reverse Mowing

Instructions for engaging reverse mowing mode safely.

Slope Gauge

Using the Slope Gauge

Instructions on how to use the slope gauge to determine safe operating angles.

Assembly & Set-Up

Tractor Set-Up

General note about the manual covering various models and specifications.

Moving The Tractor Manually

How to move the tractor manually by shifting into neutral.

Shipping Brace Removal

Instructions for removing shipping braces before operation.

Assembly & Set-Up

Connecting the Battery Cables

Step-by-step guide for connecting the tractor's battery cables.

Checking Tire Pressure

Warning and instruction to check and adjust tire pressure.

Setting the Deck Gauge Wheels

How to adjust deck gauge wheels for proper cutting height.

Assembly & Set-Up

Adjusting the Seat

Instructions for adjusting the operator's seat for comfort and proper engagement.

Gas and Oil

Instructions for servicing the engine with gasoline and oil.

Controls and Features

Throttle;Choke Control

Description of the throttle/choke control and its function.

Brake Pedal

Explanation of the brake pedal's operation and safety interlock function.

Controls and Features

Key Controls Overview

Explanation of key tractor controls like deck lift, ignition, drive, and shift levers.

Controls and Features

Fuel Level Indicator

How to read the fuel level indicator on the dash.

PTO;Blade Engage Handle

Instructions for engaging and disengaging the PTO/Blade.

Parking Brake; Cruise Control Lever

How to use the parking brake and cruise control lever.

Operation

Starting the Engine

Step-by-step instructions for safely starting the tractor engine.

Safety Interlock Switches

Explanation of the safety interlock system and its function.

Stopping the Engine

Instructions for safely shutting off the tractor engine.

Operation

Driving The Tractor

Basic instructions for driving the tractor forward and in reverse.

Reverse Caution Mode

How to safely operate the tractor in reverse with blades engaged.

Operation

Driving On Slopes

Safety guidelines for operating the tractor on slopes.

Parking Brake & Cruise Control

How to engage the parking brake and set the cruise control.

Using the Deck Lift Lever

Instructions for raising and lowering the cutting deck.

Operation

Engaging the PTO

How to engage the PTO to power the cutting deck or attachments.

Mowing Best Practices

Tips and safety information for mowing with the tractor.

Maintenance & Adjustments

Maintenance Schedule

A schedule outlining required maintenance tasks and intervals.

Engine Maintenance

General information and safety for engine maintenance.

Changing the Engine Oil

Detailed steps for changing the engine oil and filter.

Maintenance & Adjustments

Transmission & Battery

Notes on transmission and battery maintenance and safety.

Cleaning and Deck Washing

Instructions for cleaning the tractor and using the deck wash system.

Maintenance & Adjustments

Lubrication Points

Instructions for lubricating various points including wheels and linkage.

Deck Spindle Lubrication

Lubrication instructions for the deck spindles.

Maintenance & Adjustments

Deck Spindle Lubrication

Lubrication instructions for the deck spindles.

Deck Leveling Adjustments

How to adjust the deck for proper front-to-rear leveling.

Maintenance & Adjustments

Deck Leveling Adjustments

How to adjust the deck for proper side-to-side leveling.

Steering Adjustment

How to adjust the steering linkage for proper alignment.

Parking Brake Adjustment

What to do if the parking brake needs adjustment.

Service

Cutting Deck Removal

Step-by-step instructions for removing the cutting deck.

Service

Changing the Deck Belt

Instructions for changing the tractor's deck belt.

Service

Cutting Blades

Safety warnings and instructions for removing, sharpening, and balancing blades.

Service

Battery Service (Jump Start & Charging)

Safety warnings and instructions for jump starting and charging the battery.

Electrical System Fuse

Information about the tractor's electrical fuse.

Tire Pressure Warning

Warning about tire pressure and its effect on mowing.

Troubleshooting

Engine Starting Issues

Common causes and remedies for engine starting issues.

Engine Operation Problems

Causes and solutions for erratic engine operation, overheating, hesitation, rough idle.

Vibration and Cutting Issues

Causes and solutions for excessive vibration and uneven or poor grass cutting.

Specifications

Capacities, Transmission, and Engine Specs

Fuel, crankcase, speed, engine make, power, torque, and compression specs.

Electrical, Brakes, Tires, and Dimensions

System voltage, battery, fuse, brake type, tire sizes, and machine dimensions.

Electrical Diagram

LX423 and LX427 Wiring Diagram

Wiring diagram for the LX423 and LX427 models.

Limited Warranty for Lawn & Garden Tractors

Obtaining Warranty Service

Steps to follow to obtain warranty service.

Warranty and Local Laws

Information on how local laws affect the warranty coverage.

California Emission Control Warranty Statement

Warranty Rights and Obligations

Owner's rights and responsibilities under the emission warranty.

Manufacturers Warranty Coverage

Details on what the manufacturer's warranty covers.

Owners Warranty Responsibilities

Owner's duties for maintaining warranty coverage.

Warranted Parts

Warranted Parts Overview

Lists warranted components for Fuel, Air, Ignition, Exhaust, Misc, and Evaporative Control systems.

Related product manuals

Toro LX420 13AX60RG744

Toro LX466 13AT61RH044

36 pages

Toro LX466 13AT61RH048

36 pages

Toro LX423 - User Manual

Table of Contents

Questions and Answers:

Toro LX423 Specifications

Summary

Finding Model Number

Finding Model Number

Customer Support

Contacting Customer Support

Important Safe Operation Practices

General Operation

Important Safe Operation Practices

Slope Operation

Important Safe Operation Practices

Children Safety

Towing Guidelines

Safe Gasoline Handling

Important Safe Operation Practices

General Service Practices

Engine Modification Warnings

Spark Arrestor Information

Safety Labels

Console Functions

Brake Pedal Operation

Engage Reverse Mowing

Slope Gauge

Using the Slope Gauge

Assembly & Set-Up

Tractor Set-Up

Moving The Tractor Manually

Shipping Brace Removal

Assembly & Set-Up

Connecting the Battery Cables

Checking Tire Pressure

Setting the Deck Gauge Wheels

Assembly & Set-Up

Adjusting the Seat

Gas and Oil

Controls and Features

Throttle;Choke Control

Brake Pedal

Controls and Features

Key Controls Overview

Controls and Features

Fuel Level Indicator

PTO;Blade Engage Handle

Parking Brake; Cruise Control Lever

Operation

Starting the Engine

Safety Interlock Switches

Stopping the Engine

Operation

Driving The Tractor

Reverse Caution Mode

Operation

Driving On Slopes

Parking Brake & Cruise Control

Using the Deck Lift Lever

Operation

Engaging the PTO

Mowing Best Practices

Maintenance & Adjustments

Maintenance Schedule

Engine Maintenance

Changing the Engine Oil

Maintenance & Adjustments

Transmission & Battery

Cleaning and Deck Washing

Maintenance & Adjustments

Lubrication Points

Deck Spindle Lubrication

Maintenance & Adjustments

Deck Spindle Lubrication

Deck Leveling Adjustments

Maintenance & Adjustments

Deck Leveling Adjustments

Steering Adjustment

Parking Brake Adjustment

Service

Cutting Deck Removal