Toro Power Max 726 OE - Primer Bulb Operation; Choke Control Setting; Throttle Setting for Starting; Engaging Starter Mechanism

4.Firmlypushintheprimerwithyourthumb2times
(15°For-9°Corabove)or4times(below15°For
-9°C),holdingtheprimerinforasecondbefore
releasingiteachtime(Figure23).
g018891
Figure23
5.RotatethechoketotheChokeposition(Figure24).
g018892
Figure24
6.MovethethrottletotheFastposition(Figure25).
Figure25
7.Startthemachinepullingtherecoilstarterorpressing
theelectric-starterbutton(Figure26).
g018893
Figure26
1.Electric-starterbutton3.Recoilstarter
2.Electricstarterplug-in
Note:Tousetheelectricstarter,connectapower
cordtotheelectricstarterplug-inrstandthentoa
poweroutlet.UseonlyaUL-listed,16-gaugeextension
cordrecommendedforoutdoorusethatisnotlonger
than50feet(15m).
WARNING
Theelectricalcordcanbecomedamaged,
causingashockorre.
Thoroughlyinspecttheelectricalcordbefore
usingthemachine.Ifthecordisdamaged,
donotoperatethemachine.Replaceorrepair
thedamagedcordimmediately.Contactan
AuthorizedServiceDealerforassistance.
Important:Topreventdamagingtheelectric
starter,runitinshortcycles(5secondsmaximum,
thenwaitoneminutebeforetryingtostartit
again).Iftheenginestilldoesnotstart,take
themachinetoanAuthorizedServiceDealerfor
service.
8.Disconnectthepowercordfromthepoweroutletrst
andthenfromthemachine(electricstartonly).
9.Allowtheenginetowarmupforseveralminutes,move
thechoketowardtheRunposition.Waitfortheengine
torunsmoothlybeforeeachchokeadjustment.
15