Toro Power Max 726 OE - Checking and Adjusting Auger;Impeller Cable; Checking Auger Gearbox Oil Level

Yearly—Inspecttheauger/impellercable
andadjustorreplaceitifnecessary.
1.Loosenthejamnut.
2.Engagetheauger/impellerleverandholditinplace
(
Figure39).
Figure39
3.Loosenortightentheturnbuckletoadjustthespring
lengthto2.75inches(7cm)(Figure40)
2
1
3
g019047
4
Figure40
1.Jamnut
3.Spring
2.Turnbuckle
4.2.75inches(7cm)
4.Tightenthejamnut(Figure40),ensuringthereisslight
tensiononthecable.
5.Iftheauger/impellercableisproperlyadjustedbut
aproblemremains,contactanAuthorizedService
Dealer.
CheckingtheAugerGearbox
OilLevel
ServiceInterval:Yearly—Checktheaugergearboxoiland
addoilifnecessary.
1.Movethemachinetoalevelsurface.
2.Cleantheareaaroundthepipeplug(Figure41).
Figure41
3.Removethepipeplugfromthegearbox.
4.Checktheoillevelinthegearbox.Theoilshouldbeat
thepointofoverowingatthelleropening.
5.Iftheoillevelislow ,addGL-5orGL-6,SAE85-95
EPgearoillubricanttothegearboxuntilthepointof
overow .
Note:Donotusesyntheticoil.
6.Installthepipepluginthegearbox.
21