To Next PageTo Next Page
Need help?Do you have a question about the Toro Power Max 826 OAE and is the answer not in the manual?
General| Clearing Width | 26 inches |
|---|---|
| Stages | Two-stage |
| Start Type | Electric start |
| Auger Material | Steel |
| Engine | 252cc Toro Premium 4-cycle |
| Drive System | Self Propelled |
| Speeds | 6 forward, 2 reverse |
| Fuel Capacity | 2.5 quarts |
Identifies the location of model and serial numbers for product reference and service.
Explains the meaning of the safety-alert symbol used to signal potential hazards.
Provides essential safety rules to prevent serious personal injury and product damage.
Details the location and purpose of safety decals for operator awareness.
Step-by-step guide for attaching the upper handle assembly.
Instructions for mounting the discharge chute.
Guide for connecting the linkage that controls the traction drive.
Procedure for attaching the rod that controls the discharge chute.
Instructions for mounting the snow-cleanout tool.
Procedure to check and add engine oil before operation.
Instructions to verify and adjust tire pressure for safe operation.
Procedure to inspect and adjust skids and scraper for proper ground clearance.
Verifying the correct functioning of the machine's traction system.
Diagram and list identifying key parts of the snowthrower.
Technical details including model, weight, dimensions, and engine capacity.
Information on compatible Toro-approved attachments and accessories.
Crucial safety guidelines to follow before starting the snowthrower.
Overall safety practices for operating the snowthrower safely.
Precautions for handling and storing fuel safely to prevent fire or explosion.
Instructions on using the correct fuel and filling the tank safely.
Safety rules to follow while the snowthrower is in use.
Procedures for starting the engine on both electric-start and standard models.
Steps to safely stop the engine after operation.
How to engage and disengage the machine's forward and reverse movement.
Instructions on selecting the appropriate gear for different snow conditions.
Guide on engaging and disengaging the auger and impeller.
How to use the Quick Stick control for chute and deflector adjustment.
Steps to direct the snow discharge using the Quick Stick.
Procedure for safely removing snow blockages from the discharge chute.
Advice for efficient and safe snowthrower operation.
Safety precautions to take after the machine has been used.
Steps to prevent snowthrower components from freezing after use.
A schedule outlining required maintenance tasks and intervals.
Essential safety rules to follow during any maintenance activity.
Steps to take before starting any maintenance work on the machine.
Detailed procedure for checking and topping up the engine oil.
How to inspect and adjust the skids and scraper for optimal performance.
Procedure for inspecting and adjusting the traction control cable.
Procedure for inspecting and adjusting the auger/impeller control cable.
Steps to check and add oil to the auger gearbox.
Instructions for draining and refilling the engine oil.
Guide for applying lubricant to the hex shaft for smooth operation.
Instructions for removing the old spark plug and installing a new one.
How to adjust the latch that secures the discharge chute position.
Recommendation to consult a dealer for drive belt replacement.
Procedure for replacing the headlight assembly on specific models.
Safety guidelines for storing the snowthrower.
Steps for preparing and storing the snowthrower for extended periods.
Procedures for preparing the snowthrower after storage.
Solutions for problems where the electric starter does not turn.
Common causes and fixes for engine starting problems.
Troubleshooting steps for an engine that runs unevenly.
Solutions for issues with snow discharge performance.
Fixes for a chute that won't lock or move.
Troubleshooting for when the machine doesn't clear snow properly.
