Toro Power Max Heavy Duty 1030 - Checking the Auger-Gearbox-Oil Level

g260108
Figure29
1.1.5mm(1/16inch)
3.Augerclutcharm
2.Frame
4.Iftheauger/impellercableisnotproperly
adjusted,dothefollowingsteps:
5.Loosenthejamnut(Figure30).
g322960
Figure30
1.Jamnut2.Turnbuckle
6.Loosenortightentheturnbucklethatadjuststhe
tensiononthecable(Figure30).
7.Adjusttheturnbuckleuntilyouobtaintheproper
gap.
8.Tightenthejamnut.
9.Insertthe2screwsthatyoupreviouslyremoved
onthebeltcover.
10.Iftheauger/impellercableisproperlyadjusted
butaproblemremains,contactanAuthorized
ServiceDealer.
Checkingthe
Auger-Gearbox-OilLevel
ServiceInterval:Yearly—Checktheauger-gearbox
oilandaddoilifnecessary.
1.Movethemachinetoalevelsurface.
2.Cleantheareaaroundthepipeplugandremove
thepipeplugfromthegearbox(Figure31).
Note:Ifneeded,useplierstoassistinremoving
thepipeplug.
g257725
Figure31
3.Checktheoillevelusingasuitablemeasuring
device,suchasacleancabletie.Theoilshould
beapproximately3.8cm(1.5inches)belowthe
lleropening(Figure32).
g257737
Figure32
4.Iftheoillevelislow,addGL-5orGL-6,SAE
85-95EPgearoillubricanttothegearbox,then
checktheoillevelagain.
Note:Donotusesyntheticoil.
5.Installthepipepluginthegearbox.
20