Toro Power Max Heavy Duty 1030 - Replacing the Drive Belts; Replacing the Headlight; Storage Safety

g001029
Figure39
1.0.76mm(0.030inch)
5.Installthenewsparkplug,tightenitrmly,and
attachtheignitionwiretothesparkplug.
Note:Ensurethattheignitionwiresnaps
completelyintoplaceonthesparkplug.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetraction-drivebelt
becomesworn,oil-soaked,orotherwisedamaged,
haveanAuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlight
Replacetheheadlightassembly(Toropartnumber138-0670)whenneeded.
1.Removetheheadlightwirefromthebackoftheheadlight(AofFigure40).
2.Removetheboltandnutholdingtheheadlightassemblyontotheheadlightbracketandthenremovethe
oldheadlightassembly(BofFigure40).
3.Securethenewheadlightassemblyontotheheadlightbracketwiththepreviouslyremovednutand
bolt(CofFigure40).
4.Inserttheheadlightwirestraightintothebackoftheheadlightuntilitissecurelyinplace(DofFigure40).
g256137
Figure40
Storage
StorageSafety
•Shutofftheengine,removethekey,andwait
forallmovementtostopbeforeyouleavethe
operator’sposition.Allowthemachinetocool
beforeadjusting,servicing,cleaning,orstoringit.
•Fuelfumesarehighlyammable,explosive,and
dangerousifinhaled.Ifyoustoretheproductinan
areawithanopename,thefuelfumesmayignite
andcauseanexplosion.
•Donotstorethemachineinahouse(living
area),basement,oranyotherareawhereignition
sourcesmaybepresent,suchashotwaterand
spaceheaters,clothesdryers,furnaces,andother
appliances.
•Donottipthemachineeitherforwardorbackward
withfuelinthefueltank;otherwise,fuelmayleak
outofthemachine.
•Donotstorethemachinewithitshandletipped
downontotheground;otherwise,oilmayleakinto
theenginecylinderandontotheground,andthe
enginemaynotstart.
StoringtheMachine
1.Onthelastrefuelingoftheyear,addfuel
stabilizertofreshfuelasdirectedbythefuel
stabilizermanufacturer.
23