Recycling the Clippings
Your mower comes from the factory ready to recycle
the grass and leaf clippings back into the lawn.
If the grass bag is on the mower, remove it (refer to
Removing the Grass Bag on page 8) before
recycling the clippings. If the side discharge chute is
on the mower, remove it and lock the side discharge
door (refer to Removing the Side Discharge Chute on
page 9) before recycling the clippings.
important: Ensure that ...............
the rear discharge plug ....//
_-....
is in place before you
recycle the clippings.
.... J
m-5587
Bagging the Clippings
Use the grass bag when you want to collect grass
and leaf clippings from the lawn.
If the side discharge chute ison the mower, remove it
and lock the side discharge door (refer to Removing
the Side Discharge Chute on page 9) before bagging
the clippings.
installing the Grass Bag
1. Raise and hold up
the rear door.
2. Remove the rear
discharge plug.
, I
3. Install the bag onto the door rod.
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.
3352-565 Rev A
To Next Page
Loading...
Need help?
General
