This document is a user manual for the Toro Flex-Force Power System™ 60V MAX 21in Recycler® Lawn Mower with SmartStow®.
Function Description
The Toro Flex-Force Power System™ 60V MAX 21in Recycler® Lawn Mower is a battery-powered walk-behind lawn mower designed for residential use. It is primarily used for cutting grass on well-maintained lawns, but can also be used for cutting brush or for agricultural uses. The mower features a self-propel drive system, making it easier to maneuver. The "Recycler" function implies that it is designed to finely cut grass clippings and return them to the lawn as mulch, while the "SmartStow" feature allows for vertical storage to save space.
Important Technical Specifications
Models:
- Model No. 21356 (Serial No. 400000000 and Up)
- Model No. 21356T (Serial No. 400000000 and Up)
Battery Pack (Model 88660):
- Battery: 6.0 Ah
- Capacity: 324 Wh
- Voltage: 60V maximum and 54V nominal.
- Battery Pack (Model 88675):
- Battery: 7.5 Ah
- Capacity: 405 Wh
Battery Charger (Model 88602):
- Type: 60V MAX Lithium-ion Battery Charger
- Input: 120V AC 50/60Hz Max 2.0A
- Output: 60V MAX DC 2.0A
Approximate Temperature Ranges:
- Charge/store the battery pack at: 5°C (41°F) to 40°C (104°F)
- Use the battery pack at: -30°C (-22°F) to 49°C (120°F)
- Use the machine at: 0°C (32°F) to 49°C (120°F)
Cutting Height:
The cutting height is adjustable, with settings ranging from 32 mm (1-1/4 inches) to 83 mm (3-1/4 inches).
Usage Features
Setup and Operation:
- Mounting the Battery Charger: The battery charger can be securely mounted on a wall using the wall-mount key holes.
- Assembling the Grass Bag: The grass bag needs to be assembled before use.
- Unfolding the Handle: The handle must be properly unfolded and locked into position before operation. Care must be taken to avoid damaging the cables during this process.
- Installing the Battery Pack: The battery pack is inserted into the battery compartment. Ensure the vents on the battery are clear of any dust and debris. The battery-compartment lid must be closed completely for proper operation.
- Adjusting the Cutting Height: The cutting height is adjusted by setting all wheels to the same desired height.
- Starting the Machine: Insert the electric-start button, squeeze the blade-control bar, and press the electric-start button to engage the motor.
- Using the Self-Propel Drive: Pull the self-propel drive bar to the handle and hold it to engage the self-propel drive. The maximum self-propel-drive speed is fixed, but the space between the self-propel drive bar and the handle can be increased to reduce speed.
- Recycling the Clippings: The machine is designed to finely cut grass and leaf clippings and return them to the lawn.
- Bagging the Clippings: A grass bag can be installed to collect clippings.
- Removing the Grass Bag: The grass bag can be easily removed for emptying.
- Shutting Off the Machine: Release the blade-control bar to stop the motor. Remove the electric-start button and the battery pack for safety.
- Storing the Machine in the Vertical-Stow Position: The handle can be folded and the machine stored vertically to save space.
Battery Status and Charging:
- Battery Charge Status: The battery has LED indicators to show its charge level.
- Charging the Battery Pack: The battery pack is not fully charged when purchased and must be charged before first use. The charger indicates battery status (charging, fully charged, over/under temperature, or fault) via LED indicators.
- Battery Pack Storage: Store the battery, battery pack, and charger in a clean, dry area within the appropriate temperature range. Do not store the battery pack in direct sunlight or near heat sources.
Maintenance Features
General Maintenance:
- Cleaning under the Machine: After each use, clean the underside of the machine to prevent buildup of grass clippings.
- Cleaning the Machine: Wash out clippings from under the machine.
- Lubricating the Machine: Lubricate all bearings that have been lubricated at the factory for the life of the machine.
- Inspecting and Maintaining: Regularly inspect and maintain the machine. Repairs should be performed by an Authorized Service Dealer.
Blade Maintenance:
- Replacing the Blade: The blade should be replaced yearly or if it is damaged, cracked, or excessively dull/nicked. A torque wrench is required to install the blade properly.
- Sharpening the Blade: The blade should be sharpened to maintain cutting performance.
- Safety during Blade Maintenance: Always remove the electric-start button and battery pack before servicing the blade. Wear gloves when servicing the blade.
Other Maintenance:
- Checking Grass Collection Bag: Regularly check the grass collection bag for deterioration or wear, and replace it as needed.
- Checking Fasteners: Check all fasteners for tightness.
- Checking Safety Decals: Ensure all safety decals are legible and replace any that are damaged or missing.
- Adjusting the Self-Propel Drive: If the self-propel drive is out of adjustment, adjust the self-propel drive cable.
Troubleshooting:
The manual includes a comprehensive troubleshooting section with possible causes and corrective actions for common issues such as the machine not starting, battery pack not charging, self-propel not working, and poor cutting quality.
Recycling:
The manual provides information on how to properly recycle the lithium-ion battery pack, emphasizing the importance of not disposing of it in household waste and directing users to call a recycling hotline or visit a recycling website.
Need help?
General
To Next Page