Toro Sand Pro 5040 - Operation; Operating Tips; Maintenance; Greasing the Lift Frame

Operation
Specications
Netweight
38.5kg(85lb)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachineto
enhanceandexpanditscapabilities.Contactyour
AuthorizedServiceDealerorDistributororgoto
www.T oro.comforalistofallapprovedattachments
andaccessories.
OperatingTips
•Thefrontliftframeisdesignedtoacceptonly
certainattachments.Donottrytoinstallarear
mountattachmenttothefrontliftframe,asdamage
tothemachinemayoccur.
•T olowerthefrontliftframe,pushtheliftlever
forward.
•T oallowthefrontliftframetooat,pushthelift
leverforwardandtothesideintothedetent.
•T oraisethefrontliftframe,pulltheliftlever
rearward.
•Becomefamiliarwiththesafeoperationofthe
equipment,withtheoperatorcontrols,andsafety
signs.
•Keephandsandfeetawayfrommovingpartsand
hotsurfaces.
Maintenance
Note:T oobtainanelectricalschematicorahydraulic
schematicforyourmachine,visitwww.Toro.com.
GreasingtheLiftFrame
Thefrontliftframehas5greasettings(Figure27)
thatmustbelubricatedregularlywithNo.2lithium
grease.Ifthemachineisoperatedundernormal
conditions,lubricateallbearingsandbushingsafter
every100hoursofoperation.Lubricatethebearings
andbushingsimmediatelyaftereverywashing,
regardlessoftheintervallisted.
g003677
Figure27
20