Toro Sand Pro 5040 - Page 5

5.IfyouareinstallingthiskittoaModel08745
machine,dothefollowing:
A.Removethe3boltsandnutssecuringthe
existingliftvalvetotheframe,andseparate
itfromtheframetoallowforremovalofthe
T-tting(340-94)asshowninFigure5.
B.Disconnectthehydraulictube(108-8415)
fromthe90°tting(340-77)onleftsideof
existingliftvalve.
C.Disconnectthehydraulichose(144-1367)
fromtheT-tting(340-94)asshownin
Figure6.
D.LoosentheT-tting(340-94)ontheright
sideoftheexistingliftvalve.
E.RemovetheT-tting(340-94)fromexisting
valveandretainforlaterinstallation.
g362552
Figure5
1.Removetheseboltsand
nuts.
2.Disconnectthishydraulic
tube(108-8415)fromthe
90°tting.
g362543
Figure6
1.Disconnectthishydraulic
hose(144-1367)fromthe
T-tting.
3.Disconnectanddiscard
anddiscardthishydraulic
tubeconnectedtothe
T-tting.
2.DisconnectthisT-tting
(340-94)fromtheexisting
valve.
5