Toro SnowMaster 724 QXE - Adjusting Auger Cable; Adjusting Transmission Cable

AdjustingtheAugerCable
ServiceInterval:Aftertherst2hours
Yearly
Ifthedrivebeltslipsorsquealsunderheavyload,adjustthe
augercable.
1.Loosenthenutonthelowercableclamp,butdonot
removeit(Figure23).
Figure23
1.Nut
3.Connector
2.Cable4.Spring
2.Pullthecableuptoremovesomeslack(Figure23).
Important:Donotremovealltheslackfrom
thecable.Removingalltheslackfromthecable
preventstheaugerfromstoppingproperly.
3.Holdthecableinplaceandtightenthenut(Figure23).
AdjustingtheTransmission
Cable
ServiceInterval:Aftertherst2hours
Yearly
Ifthewheelseasilystallout,orifthewheelsdrivewithout
engagingtheself-propelhandle,adjustthetransmissioncable.
1.Loosenthenutontheuppercableclamp,butdonot
removeit(Figure24).
Figure24
1.Nut
2.Cable
2.Pullthecabledowntoremovemostoftheslackinthe
cable(Figure24).
Important:Donotremovealltheslackfromthe
cable.Removingalltheslackfromthecablemay
causethewheelstoengagewithoutengagingthe
self-propelhandle.
3.Tightenthenut(Figure24).
CheckingtheTirePressure
ServiceInterval:Yearly
Checktheairpressureinthetiresandinatethemto103to
137kPa(15to20psi).
17