Toro SnowMaster 724 ZXR 36001 - Replacing the Spark Plug; Adjusting the Auger Cable; Adjusting the Transmission Cable

ReplacingtheSparkPlug
ServiceInterval:Every100hours—Replacethesparkplug.
WARNING
Replacingthesparkplugwhiletheengineishot
canresultinburns.
Waituntiltheengineiscooltoreplacethespark
plug.
UseaTorosparkplugorequivalent(Champion®RN9YCor
NGKBPR6ES).
1.Removetheboot(Figure20).
Figure20
2.Cleanaroundthebaseofthesparkplug.
3.Removeanddiscardtheoldsparkplug.
Note:Youwillneedaratchetwrenchextensionto
removethesparkplug.
4.Setthegapbetweentheelectrodesonanewsparkplug
at0.76mm(0.030inch)(Figure21).
Figure21
1.0.76mm(0.030inch)
AdjustingtheAugerCable
ServiceInterval:Aftertherst2hours
Yearly
Ifthedrivebeltslipsorsquealsunderheavyload,adjustthe
augercable.
1.Loosenthenutonthelowercableclamp,butdonot
removeit(Figure22).
Figure22
1.Nut
3.Connector
2.Cable4.Spring
2.Pullthecableuptoremovesomeslack(Figure22).
Important:Donotremovealltheslackfromthe
cable.Removingalltheslackfromthecablewill
preventtheaugerfromstoppingproperly.
3.Holdthecableinplaceandtightenthenut(Figure22).
AdjustingtheTransmission
Cable
ServiceInterval:Aftertherst2hours
Yearly
Ifthewheelseasilystallout,orifthewheelsdrivewithout
engagingtheself-propelhandle,adjustthetransmissioncable.
1.Loosenthenutontheuppercableclamp,butdonot
removeit(Figure23).
15