Toro TimeCutter SW Series - Installing the Seat to the Seat Pan

g027737
Figure4
1.Steering-wheelcover
4.Topcover
2.Locknut
5.Column
3.Steeringwheel
6.Installtherearcovertothebackofthefootrest
withthetabsatthebottominsidethefootrest
andthe2screwsinthetop(Figure5).
Note:Ensurethetabsoftherearcoverare
insidethefootrest.
g027887
Figure5
1.Backcover
2.Screws
4
InstallingtheSeattothe
SeatPan
MachinesShippedinaSteelCrate
Only
Partsneededforthisprocedure:
2
Shoulderbolt(seatswithoutadetachedcushiononly)
1
Seat(seatswithoutadetachedcushiononly)
2Hexbolt
2Washer
1
Seatpan
1
Seatassembly(seatswithadetachedcushiononly)
1
Bottomcushion(seatswithadetachedcushiononly)
2
Flange-hexbolt(seatswithadetachedcushiononly)
Procedure
1.Iftheseatdoesnothaveadetachedcushion,
installtheseattotheseatpanusing2shoulder
bolts,2hexbolts,and2washers.
g213714
Figure6
1.Shoulderbolt(2)2.Hexboltandwasher(2)
2.Iftheseatdoeshaveadetachedcushion,
continueasfollows:
A.Installthebottomcushiontotheseat
assemblyusing2ange-hexbolts(Figure
7).
4