decal139-2395
139-2395
1. Parking brake 4. Neutral
2. Fast 5. Reverse
3. Slow
6. T raction controls
decal140-2748
140-2748
decal142-5864
142-5864
decal144-5288
144-5288
Note: This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator ’ s
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine.
1. W arning—read the
Operator ’ s Manual .
4. Runover hazard—do not
carry passengers; look
behind you when moving
in reverse.
2. Cutting/dismemberment
hazard of the ngers or
hand—keep hands away
from moving parts; keep
all guards and shields in
place.
5. T ipping hazard—when
loading onto a trailer , do
not use dual ramps; only
use a singular ramp wide
enough for the machine;
do not use a ramp with
a slope greater than 15°;
back up the ramp (in
reverse) and drive forward
of f the ramp.
3. Thrown object
hazard—keep bystanders
away; pick up any debris;
keep the deector in place.
6. T ipping hazard—do not
use the machine near
drop-of fs or on slopes
greater than 15°; only
operate across slopes less
than 15°.
8
To Next Page
Loading...
Need help?
General
