Toro TITAN HD 2500 Series - Belt Maintenance

BeltMaintenance
InspectingtheBelts
ServiceInterval:Every50hours
Replacethebeltifitisworn.Thesignsofawornbelt
includesquealingwhilethebeltisrotating;theblades
slippingwhilecuttinggrass;andfrayededges,burn
marks,andcracksonthebelt.
ReplacingtheMowerBelt
forSide-DischargeMower
Decks
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch(PTO),andengagethe
parkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemowertothe76mm(3inch)height
ofcut.
4.Removethebeltcovers(Figure92).
g027729
Figure92
5.Removethespringtensionfromthe
spring-loadedidlerpulley.RefertoFigure94
orFigure95.
Note:For1500and2000Seriesmower
decks,usethespringremovaltool(ToroPart
No.92-5771)toremovethespringfromthe
mower-deckpost(Figure94).
Note:For2500Seriesmowerdecks,usea
ratchetinthesquareholeintheidlerarmto
removetensionontheidlerspring(Figure95).
6.Removethebeltfromthemower-deckpulleys
andtheclutchpulley.
7.Installthenewbeltaroundthemowerpulleys
andtheclutchpulleyundertheengine(Figure
93orFigure95).
g036861
Figure93
1500and2000SeriesMowerDecks
1.Clutchpulley3.Spring-loadedidlerpulley
2.Mowerbelt
4.Spring
g028279
Figure94
1500and2000SeriesMowerDecks
1.Spring-removaltool(Toro
PartNo.92-5771)
4.Idlerarm
2.Idlerspring5.Mowerbelt
3.Mower-deckpost
66