EasyManua.ls Logo

Toro Titan Z4800 - Adjusting the Height of Cut; Positioning the Seat; Adjusting the Motion Control Levers

Toro Titan Z4800
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHASSIS
3-10 2007 - 2008 Titan Z Service Manual
3
Left Hand Fender & Fuel Tank Installation
12. The fuel line coming from the fuel tank is held in
place by a clamp located on the side of the seat box
assembly. Open the clamp to release the fuel line
(Fig. 032).
13. Remove the fuel tank from the machine (Fig. 033).
1. Position the fuel tank to the left hand side of the
machine. Route the fuel line into the clamp located
beside the seat box assembly (Fig. 034). Close the
clamp to secure the fuel line (Fig. 035).
Fig. 032 IMG-0193
Fig. 033 IMG-0192
Fig. 034 IMG-0193
Fig. 035 IMG-0194

Other manuals for Toro Titan Z4800

Related product manuals