CHASSIS
3-272007 - 2008 Titan Z Service Manual
3
29. Unplug the PTO clutch wire (brown/green) from the
electric PTO clutch (Fig. 096).
28. Remove the oil switch (blue) wire from the oil switch
ORFDWHGQH[WWRWKHRLO¿OWHU)LJ
30. Open the clamp that secures the PTO clutch wire
(Fig. 097). Pull the wire harness up through the
frame.
Fig. 095 IMG-0264a
Fig. 096 IMG-0268a
Fig. 097 IMG-0271a
31. Push the rubber grommet, located in the rear of the
seat box assembly, toward the outside of the seat
box. Feed the wire harness to the outside of the seat
box assembly (Fig. 098).
Fig. 098 IMG-0273
To Next Page
Loading...
