CHASSIS
3-34 2007 - 2008 Titan Z Service Manual
3
Seat Box Installation
55. Remove the left side motion control stop (Fig. 123).
56. Repeat steps 54 and 55 to remove the right side
motion control stop.
2. Install two screws and washers to secure the control
stop to the seat box. (Fig. 125).
1. Position the left side motion control stop on the
inside of the seat box (Fig. 124).
Fig. 123 IMG-0307
Fig. 124 IMG-0307
Fig. 125 IMG-0309
To Next Page
Loading...
