MOWER DECK
5-2 2007 - 2008 Titan Z Service Manual
5
8. Remove the spindle assembly from the mower deck
(Fig. 233).
10. Remove the blade bolt and two washers from the
spindle shaft (Fig. 235).
9. Using a rag or a thickly-padded glove for protection,
hold the end of the blade and loosen the blade bolt
(Fig. 234).
Fig. 232 IMG-0616
Fig. 233 IMG-0617
Fig. 234 IMG-0618a
Fig. 235 IMG-0621a
6. Raise and support the rear of the mower deck with a
jack stand or lift.
7. Remove the 6 screws securing the spindle housing
to the mower deck (Fig. 232).
To Next Page
Loading...
