Toro TX 525 - Changing the Hydraulic Fluid

ChangingtheHydraulic
Fluid
ServiceInterval:Every400hours/Yearly(whichever
comesrst)
1.Parkthemachineonalevelsurface.
2.Raisetheloaderarmsandinstallthecylinder
lock.
3.Shutofftheengine,removethekey,andallow
theenginetocool.
4.Openthehood.
5.Removethehydraulic-tankcapanddipstick
(Figure62).
Note:Thellercapisbehindthefrontscreen.
Ifyouwanttoimproveyouraccesstoit,remove
thescreen.
g004357
Figure62
1.Fillerneck2.Dipstick
6.Placealargedrainpaincapableofholding57L
(15USgallons)underthedrainplugonthefront
ofthemachine(Figure63).
g004213
Figure63
1.Drainplug
7.Removethedrainplugandallowtheoiltodrain
intothepan(Figure63).
8.Whennished,installandtightenthedrainplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
9.Fillthehydraulictankwithhydraulicuidas
speciedinHydraulicFluidSpecications(page
43).
10.Starttheengineandletitrunforafewminutes.
11.Shutofftheengine.
12.Checkthehydraulic-uidlevelandadduidto
llthetankifnecessary;refertoCheckingthe
Hydraulic-FluidLevel(page43).
13.Closethehood.
45