EasyManua.ls Logo

Toro Workman 2100 - Chapter 2 Product Records and Maintenance

Toro Workman 2100
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Shift the gear selector to REVERSE. Adjust the
non-compressed spring height to 25–28mm (1” to
1-1/8”).
Check Tire Pressure
Check tire pressure every 8 hours or daily to assure
proper levels.
Air pressure range in front and rear tires is 55–103
kPa (8–15 psi).
The needed air pressure is determined by the payload
carried. The lower the air pressure, the less the
compaction and tire marks are minimized. Lower
pressure should not be used for heavy payloads at
high speeds.
Higher pressures should be used for heavier payloads
at higher speeds. Do not exceed the maximum
pressure.
Before Operating
– 13

Table of Contents

Other manuals for Toro Workman 2100

Related product manuals